Rns510

[jackie86]

Hello friends.
I have a problem with this unit, only logo shows, then go off...
I tried with some repair software cd but without success..
Does anybody have solution??
Where is firmware stored, in which flash, i would like to try to rebowling procedure..
Tnx in advance..
Jackie


Sent from my iPhone using Tapatalk

[Seby_TM]

Hello friends.
I have a problem with this unit, only logo shows, then go off...
I tried with some repair software cd but without success..
Does anybody have solution??
Where is firmware stored, in which flash, i would like to try to rebowling procedure..
Tnx in advance..
Jackie


Sent from my iPhone using Tapatalk


You select 2 + cable at 12v and Gnd correctly ?
In the time you find some solutions ?

[attilaa0]

Solution is find the HW and SW version on label and part number then download an update cd and make update.This update take about 1 hour.
Yesterday i solved one of this units from skoda with succes.

[Seby_TM]

From where to downloald and how to fix it ?

To writhe an blank CD-DVD with the specific HW and SW from this downloald and after to add the CD-DVD in unit for flash it ?

[jackie86]

Solution is find the HW and SW version on label and part number then download an update cd and make update.This update take about 1 hour.
Yesterday i solved one of this units from skoda with succes.

Can you send me link where can i find firmware??



Sent from my iPhone using Tapatalk

[attilaa0]

Yes in P.M !I don't know if is allowed here on forum this links!
@ Seby
Yes write this firmware to a blank CD not DVD. Use magic iso .write with lowest write speed.And read instructions on forum and Flash it the radio.It takes about 1 hour.

[jackie86]

Can you send link to tread where is instruction for this job??
Regards,
jackie


Sent from my iPhone using Tapatalk

[attilaa0]

Only press Setup + eject + info,and insert the CD.After update finish the cd eject automatically ,then restart the radio .If you have skoda must rename 2 files .
Skoda owners

Extract files PQTABLE and SKTABLE from image (use magiciso or ultraiso). Files can be found from path: \VUCI\B101\RNSMIDEC\PROG
Switch the filenames by just renaming SKTABLE to PQTABLE and vice versa
Overwrite the renamed files back to image and save the image. Burn this image to DVD or CD.
Load or reload the Firmware to your RNS-510 using the steps below.
Voil?… buttons are back!


This is example but i don't know the exact what model you have .

[jackie86]

http://images.tapatalk-cdn.com/15/12/12/b1d7dc542caa7cac988c13f7d301d3bf.jpg

I use exactly same procedure as you describe..
Dont know is it normal, but when rns goes into this update mode(SWL image), unit shows status bar of updating gor a moment, then turn off image, for a 10-20 second again ON, and again off then unit turn shutdown and i must power on manualy and agin all process in circle...
???


Sent from my iPhone using Tapatalk

[attilaa0]

My unit restarts several times.Important to not interrupt power.Be patient.
For a B unit probably 3810 is best,not sure.Wait for another member answer.

[jackie86]

Thank you very much.
Will try with sw3810 and report while waiting on some other opinion..


Sent from my iPhone using Tapatalk

[attilaa0]

I found this:
I have a VW RNS510 from 2009:
Deliverypart number: 1T0035680B
HW-Version: H04
SW-Version: 1100
Can I update to this firmware 4020 in one step or do I need to update to another firmware first?
Do I need to recode something with Vag-com? if yes, what do I need to recode?

Thanks in advance,
Sincerly,
Tom.

Reply (http://www.rnsfirmware.com/firmware-4020-for-older-european-rns510-units/?replytocom=538#respond)
http://2.gravatar.com/avatar/b7bc6b4c2ce2becd980b427057a6d700?s=40&d=mm&r=g kamold (http://www.vwwatercooled.com.au) says:
January 4, 2014 at 9:29 am (http://www.rnsfirmware.com/firmware-4020-for-older-european-rns510-units/#comment-543)
No recoding required. You upgrade in one step.



attilaa0:I use same version in this days and work ok.

[jackie86]

I found this:
I have a VW RNS510 from 2009:
Deliverypart number: 1T0035680B
HW-Version: H04
SW-Version: 1100
Can I update to this firmware 4020 in one step or do I need to update to another firmware first?
Do I need to recode something with Vag-com? if yes, what do I need to recode?

Thanks in advance,
Sincerly,
Tom.

Reply (http://www.rnsfirmware.com/firmware-4020-for-older-european-rns510-units/?replytocom=538#respond)
http://2.gravatar.com/avatar/b7bc6b4c2ce2becd980b427057a6d700?s=40&d=mm&r=g kamold (http://www.vwwatercooled.com.au) says:
January 4, 2014 at 9:29 am (http://www.rnsfirmware.com/firmware-4020-for-older-european-rns510-units/#comment-543)
No recoding required. You upgrade in one step.



attilaa0:I use same version in this days and work ok.

Yes yes yes, it wotks!!! :)
Just dont recognize hdd in media option, maybe some other softwere to load or something else???



Sent from my iPhone using Tapatalk

[attilaa0]

what version did work? sw3810 or Sw4020?
yes ,maybe must load another version.I don't know other solution.
Important is that restarting issue is solved.

[jackie86]

i have loaded sw 4020 and have problem.. i will try with some other version..thank you friend