View Full Version : KESS FW 4.024 full
zizouth
15th December, 2015, 01:02 PM
Hi all,
I am desperately looking for firmware 4.024 full for Kessv2 , with sdcard file .
All link i have found need password (no reply from pm) or miss some files.
PS: look for free please don't PM for money
Thank's a lot
zizouth
17th December, 2015, 09:37 PM
Maybe help someone , 4.024 full + SDcard : here (https://www.dropbox.com/s/ppuzc035qiioxjb/4024%20fw%20%2B%20sdcard%20from%20ovi.rar?dl=0)
marinos01
22nd March, 2016, 09:58 AM
Maybe help someone , 4.024 full + SDcard : here (https://www.dropbox.com/s/ppuzc035qiioxjb/4024%20fw%20%2B%20sdcard%20from%20ovi.rar?dl=0)
Could someone please confirm that this FW is infact as advertised 4.024 and will not render my clone kess v2 useless
teamtuner
22nd March, 2016, 10:13 AM
no waranties...is your risk to use it...
marinos01
22nd March, 2016, 10:44 AM
no waranties...is your risk to use it...
Have you used this firmware before?
Do you use a clone ktag? if so what firmware and software are you running?
marinos01
23rd March, 2016, 07:18 AM
So i went ahead and flashed this firmware, but before i did that i confirmed all connections to Jtag and NXP chip by flashing the same firmware that my hardware was supplied with. I found all i needed on the CD that was included with the Kess V2.
Once i had flashed the same 3.099 firmware and changed the contents of the SDCARD and confirmed the unit working i moved onto flashing the firmware included in the link at the start of this thread.
* https://www.youtube.com/watch?v=6nFZmmQFnfs * this video was very helpful
there were multiple files to choose from. I used 4.024CRP2OK.bin for the firmware and the contents of \KESS 4.024 FULL\SD23072014 were copied onto my formatted SD card.
http://i68.tinypic.com/igm77n.jpg
http://i68.tinypic.com/kci4vo.jpg
Now i need to get a copy of ECM Titanium
OVERSPEED
23rd March, 2016, 07:39 AM
Can you try writing again NXP with jtag to test if it can reset tokens ?
teamtuner
23rd March, 2016, 07:42 AM
Can you try writing again NXP with jtag to test if it can reset tokens ?
with CRP2..?....j-tag...j-link?...no way...
marinos01
23rd March, 2016, 07:44 AM
How do you check token status?
Sent from my SM-T805Y using Tapatalk
marinos01
23rd March, 2016, 08:00 AM
with CRP2..?....j-tag...j-link?...no way...
Serial port method should work.
OVERSPEED
23rd March, 2016, 10:02 AM
To make it clear:
Renew tokens by jlink: just with 3.099
Anything newer than this require another way as serial, hw, etc
tango
23rd March, 2016, 12:03 PM
ttl usb adapter ie uart
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.