PDA

View Full Version : KESS FW 4.024 full



zizouth
15th December, 2015, 01:02 PM
Hi all,

I am desperately looking for firmware 4.024 full for Kessv2 , with sdcard file .
All link i have found need password (no reply from pm) or miss some files.

PS: look for free please don't PM for money

Thank's a lot

zizouth
17th December, 2015, 09:37 PM
Maybe help someone , 4.024 full + SDcard : here (https://www.dropbox.com/s/ppuzc035qiioxjb/4024%20fw%20%2B%20sdcard%20from%20ovi.rar?dl=0)

marinos01
22nd March, 2016, 09:58 AM
Maybe help someone , 4.024 full + SDcard : here (https://www.dropbox.com/s/ppuzc035qiioxjb/4024%20fw%20%2B%20sdcard%20from%20ovi.rar?dl=0)

Could someone please confirm that this FW is infact as advertised 4.024 and will not render my clone kess v2 useless

teamtuner
22nd March, 2016, 10:13 AM
no waranties...is your risk to use it...

marinos01
22nd March, 2016, 10:44 AM
no waranties...is your risk to use it...

Have you used this firmware before?

Do you use a clone ktag? if so what firmware and software are you running?

marinos01
23rd March, 2016, 07:18 AM
So i went ahead and flashed this firmware, but before i did that i confirmed all connections to Jtag and NXP chip by flashing the same firmware that my hardware was supplied with. I found all i needed on the CD that was included with the Kess V2.

Once i had flashed the same 3.099 firmware and changed the contents of the SDCARD and confirmed the unit working i moved onto flashing the firmware included in the link at the start of this thread.
* https://www.youtube.com/watch?v=6nFZmmQFnfs * this video was very helpful

there were multiple files to choose from. I used 4.024CRP2OK.bin for the firmware and the contents of \KESS 4.024 FULL\SD23072014 were copied onto my formatted SD card.

http://i68.tinypic.com/igm77n.jpg

http://i68.tinypic.com/kci4vo.jpg

Now i need to get a copy of ECM Titanium

OVERSPEED
23rd March, 2016, 07:39 AM
Can you try writing again NXP with jtag to test if it can reset tokens ?

teamtuner
23rd March, 2016, 07:42 AM
Can you try writing again NXP with jtag to test if it can reset tokens ?
with CRP2..?....j-tag...j-link?...no way...

marinos01
23rd March, 2016, 07:44 AM
How do you check token status?

Sent from my SM-T805Y using Tapatalk

marinos01
23rd March, 2016, 08:00 AM
with CRP2..?....j-tag...j-link?...no way...
Serial port method should work.

OVERSPEED
23rd March, 2016, 10:02 AM
To make it clear:

Renew tokens by jlink: just with 3.099

Anything newer than this require another way as serial, hw, etc

tango
23rd March, 2016, 12:03 PM
ttl usb adapter ie uart