PDA

View Full Version : BMW 325TDS



fil1234
15th December, 2015, 09:43 PM
HELLO PEOPLE I NEED YOUR HELP FIND ALL MAPS I NEED TO CHANGE WITH WIONLS TANKS 347092
I HAVE FOUND TORQ LIMIT MAP-07034-19X1
SMOKE-0740A-14X10
DW-07246
TELL ME IF I,M CORRECT

Morette
16th December, 2015, 12:44 AM
There is another TQ limiter at 6FD4, and also one at 7004 but it is unusual, maybe a limiter for traction control or errors/limp.
You should not need to touch 7004.

Pump Tension is 715D, 14x13.

Pay attention to the axis in this ECU, they are reversed! data x 20 = RPM values

fil1234
16th December, 2015, 01:05 AM
can you made damos file with all maps and ofsets
this will be great

Morette
16th December, 2015, 01:33 AM
Those 5 maps are all you need.

Torque limiters are 19x1, (axis data x 20 = RPM),
map data x 0.2 = IQ (mg)

Pump Voltage map is 13 (IQ-mg) vs 14 (RPM)
I don't know the pump voltage factor in 8bit, it is approx data X 18 = Voltage in mV


DW - 8 (TPS%, factor 0.392157) x 12 (RPM)
Data is IQ in mg (factor 0.2)


Smoke is 14 (RPM) x10 (Airmass - mg/st - factor 5)
Data is IQ, mg


RPM is always factor 20 =RPM
IQ is always factor 0.2 = mg
TPS is always factor 0.392157= %


The pump voltage sometimes appears as 16bit data.

fil1234
16th December, 2015, 08:57 AM
so dw and smoke are correct