Ford 6000 please dump check

[attilaa0]

Hi!This radio has no light and can not introduce code.
Appear code and ---- and blinking but if i push any button not responde.
Here is tms and eeprom.Please check if has error.Thanks!

[attilaa0]

As i see nobody say anything so ,i want to ask something.Please change my code from 24c16.
Original code is 8079.Thanks!

[bogege]

And why not first check the buttons!
Or you've already done this sample?

[attilaa0]

I already checked ,and no problem.
And i can tell you if dump are corrupt happen same thing :can not introduce code.Even if counter not loked. Member Siti can confirmed that.

[bogege]

I did not know about this detail!
Wait a member who knows algo to clear your eeprom!

[attilaa0]

Yes .I am waiting,Siti knows this algo for sure but i am wait for other member too.
Once i have this problem with a ford 1500.It was in Loked .Siti reseted for me and in display appear Code ---- 00 but can not accept any comand.
Then reseted again and after that worked.
I guess or i hope this is happening again in my case.Difference is that radio is not LOKED .But can not try ,because i don't know algo ,only wait for help.

[ficho]

Here is you dump, code changed to 1112
regards ficho

[attilaa0]

Here is you dump, code changed to 1112
regards ficho

Thanks my friend!But not working.same thing is in display ,only ask for code.I guess maybe a hardware problem.

[RadioChiP]

Try change good working Flash+eeprom dump or see front display board maybe connections problem

[ficho]

HI,
Should be hardware problem, try to change front panel if you have some spare...
@RadioChip
I don't believe that it is a software problem since everything is displayed ok on screen, keys are scanned in several ways, should check this on board first !
regards ficho
ps. Get som v series eeprom dump and replace location 0x140 to 0x17f from your eeprom content.
Maybe this could help...

[attilaa0]

Solved!I changed motorola MCU from front panel.