Renault Megane Cabasse Auditorium code help

[simche]

Renault MeganeII Cabasse Auditorium
Alpine 6 CD charger
Philips tuner in trunk,inside ST cpu and 24C32 eeprom.
I read eeprom and calculate 3040 code but unit not accepted :( wrong code or...?
Thanks in advance!

[KierAn20]

Upload the 24c01 dump from the front panel of the Alpine CD changer unit please

[simche]

CD charger is changed and inside is dump from theme in DK forum....

[KierAn20]

Okay, you no longer have original dump from front of changer?

[simche]

Charger changed,original charger not exist more ;) In front panel(24C01) writen dump from DK...and i saved dump from "new" charger before writed dump from DK.

[KierAn20]

lol not from old broken cd changer - i mean original dump that was in this 24c01 eeprom buddy :) Did you save it before you changed it to DK one? :)

[simche]

Yes,i save dump before changed.Why?I must return orig dump from "new" CD charger?

[KierAn20]

Yes upload the original 24c01 here for code and put it back in changer front panel - then it should be possible to proceed :)

[simche]

Yes,i save dump before changed.Why?I must return orig dump from "new" CD charger?But i dont try enterig 0345 although it said that this code for DK dump.Here is orig dump from panel.

[KierAn20]

Yes,i save dump before changed.Why?I must return orig dump from "new" CD charger?But i dont try enterig 0345 although it said that this code for DK dump.Here is orig dump from panel.

Okay, cd changer code is 1516. There are 2 different sequences with these systems, first try this.

I have reset your TUNER 24c32 dump, so please put this in the tuner box and keep original cd changer dump in the cd changer.

When asked for code, enter 1516. Even if it says something like "cd error" then enter 1516 a second time, then report....

Remember this attached dump below is for the Philips tuner box only buddy :)

[simche]

Counter is still reseted this no problem.OK.I just must reprogram panel with origin dump and insert 1516 code?

[KierAn20]

Yes and it maybe will even ask you to enter this code twice - both times enter 1516.

And yes original dump back in changer panel, sometimes when you change panel dump it can be wrong type and then tuner box won't even accept its own code while changer is plugged in! :ambivalence: it is to do with two versions, tuner list and update list......

[simche]

Thank friend.I go to try and I'll answer it. ;)

[KierAn20]

And dont forget to put this attached 24c32 dump in tuner box, otherwise codes wont marry/match

[simche]

ok (y) .....

[simche]

I follow your instructions and work! ;) Thank 4 all my dear friend!