PDA

View Full Version : *** NEWS China SELL NEW GENIUS ***



bersch8688
29th December, 2015, 06:16 AM
China sell New Tool ---> NEW GENIUS

349080

http://www.obd2express.co.uk/wholesale/genius-flash-point-obdii-boot-ecu-hand-held-chip-tuning.html

moky
29th December, 2015, 01:16 PM
someone know if genius Fw 5.05 egal 4.036 from kess?

visibly some difference on list cars.. (Denso etc ..)

what users original genius think?


after hollidays I will test one unit and report here for fun ..!

CustomCars
30th December, 2015, 09:26 AM
I think to risky use that's tool :-)
Can imagination quality, maybe even read procedure is emulated :-)

But if firmware was rly 5.05 that's have some sense... when really works. And little faster to use than kess.

Anyway it's clone and all of us know what's that mean...

Nio
30th December, 2015, 04:26 PM
Buy original tool, not just ~~~~s. Will be dangerous for E.C.U using this tools. Good job.

Youneselm
30th December, 2015, 06:47 PM
ITS the kess V2 firmware with 30 tokens. Chinese fake miserie[emoji6]

overs0ull
30th December, 2015, 06:53 PM
the right choice is the ori tool .
I personally will not take chance to buy this cause is risky to play .....
The ori tools bring back the money even need more time but is trusted .

CustomCars
30th December, 2015, 09:14 PM
ITS the kess V2 firmware with 30 tokens. Chinese fake miserie[emoji6]

That's can be truth and older pirated FW.
Kess clone still selling... when sale dropping, new FW will arrive with high price,
...... infinity ..........

moky
30th December, 2015, 09:51 PM
We must know... :)

Youneselm
30th December, 2015, 09:52 PM
I think 3.099 fw[emoji5]

moky
30th December, 2015, 09:57 PM
So list car is false..denso,simos 12/18...

teamtuner
30th December, 2015, 10:29 PM
is a ~~~~ty kess with touch screen display...finally,china guys saw the possibility to attach this display...ahaha...too late mates...we like computers

Youneselm
30th December, 2015, 11:22 PM
@teamtuner: Hahaha you totaly write.;-)

moky
5th January, 2016, 07:29 PM
LOL look vid?o:


http://blog.obd365.com/2015/12/30/install-genius-k-touch-obd2-ecu-tuning-tool-software/


soft on video ask firmware udate to 4.00xx from 5.00xx.... :D

and here on hardware:


http://img15.hostingpics.net/thumbs/mini_841475genius.jpg (http://www.hostingpics.net/viewer.php?id=841475genius.jpg)

:dad:

bersch8688
11th January, 2016, 06:47 PM
Found Video

https://www.youtube.com/watch?v=G-zku_zi0Qs

CustomCars
11th January, 2016, 07:34 PM
Found Video

https://www.youtube.com/watch?v=G-zku_zi0Qs


mmmm what's a nice sound ;)

nunge111
18th January, 2016, 03:16 PM
I buy 5 device in Thailand.

device work ok.read file ok.but do not export file to computer.do not export file to edit and tuning.

software do not working dsmanager notworking.

runsoftware windows error " fetal error in race 2000 loc"

winxp 5 workstation notebook donot install software.( install complete fetal error)

win7 3 workstation notebook donot install software .(install complete fetal error)

8 notebook in my home donot install software.

I do video in youtube same it .do not working.

I dispute return device .and return device to supplier.

beware device.factory do not test before sale.and supplier do not support .

bad all factory and supplier.


#### remove sd card to read by computer

computer report format only#####

teamtuner
18th January, 2016, 03:34 PM
pfff...as i said...another shi+ china bussines...

CustomCars
18th January, 2016, 05:59 PM
hahah what a mess
They put it into case, add LCD, and not tested file export.... LOL

RTQ2016
19th January, 2016, 04:23 AM
I buy 5 device in Thailand.

device work ok.read file ok.but do not export file to computer.do not export file to edit and tuning.

software do not working dsmanager notworking.

runsoftware windows error " fetal error in race 2000 loc"

winxp 5 workstation notebook donot install software.( install complete fetal error)

win7 3 workstation notebook donot install software .(install complete fetal error)

8 notebook in my home donot install software.

I do video in youtube same it .do not working.

I dispute return device .and return device to supplier.

beware device.factory do not test before sale.and supplier do not support .

bad all factory and supplier.


#### remove sd card to read by computer

computer report format only#####

What operation windows you run with? Better run on XP with patch. and better run on D630.

nunge111
19th January, 2016, 08:57 AM
dell d360 only??????

device not running in computer in world.

running better dell d360 ghost window only.

OMG.

i install windox xp in 8 notebook. Today i go to commputer suplier and test in many computer result " fetal error "

link in china autodiag donot work.

10 day i hardwork to test many test do not work.

nunge111
19th January, 2016, 09:25 AM
352646352647352648352649352650

nunge111
19th January, 2016, 09:26 AM
352651352652

install windows many many many

lol.

Overtune
20th January, 2016, 09:22 PM
I can fix this error for you if you have teamviewer for free. Fixed it for mine

Overtune
20th January, 2016, 09:25 PM
After completed setup, you need to manually replace raceloc.dll C:\Users\Your PC Name\AppData\Local\DimWare\RaceEVO\7.0
Fatal Error with be solved :)
Tested and working :)

nunge111
21st January, 2016, 03:50 AM
How to replace file to download?

I want link to test it thank you.

OVERSPEED
21st January, 2016, 03:23 PM
Can it really do by OBD these ECUS ?
simos 18
simos 12
MED17.5.20
MED17.5.21

Since the original device make virtual read, how it works ? how to retrieve OEM files to make the modifications ?

nunge111
21st January, 2016, 05:49 PM
today I install in windows 7 1/8 notebook program ktouch can running

7/8 notebook can not running

but I export file in kouch to pc

1 extrack header

2 not extrack header

and tunning with winos and ecm titanium original save and export file

original have 768.365 kb

tuning file export have 768.000 kb

I import tuning file to ktouch many file and go to writing many tuning file to car = car can not to start engine light show dtc read p0601

after select stock file to writing car can start and running ok.

extrack header originalfile > tuning can import to ktouch

do not extrack header original file > tuning finish can not import to ktouch and warning checksum error

http://www.digital-kaos.co.uk/forums/ajax.php
https://www.img.in.th/image/7HMw (https://www.img.in.th/image/7HMw)
https://www.img.in.th/image/7HMO (https://www.img.in.th/image/7HMO)
https://www.img.in.th/image/7HMc (https://www.img.in.th/image/7HMc)
https://www.img.in.th/image/7HMs (https://www.img.in.th/image/7HMs)
https://www.img.in.th/image/7HMv (https://www.img.in.th/image/7HMv)

Overtune
22nd January, 2016, 06:17 AM
I haven't experienced such issues in my device. It works ok. Perhaps you are exporting the file in dim format, or your device is defect.

nunge111
22nd January, 2016, 07:23 PM
Isuzu read transtron with kess v2 1mb

read china new genius ktouch 525 kb

good work device ???????

I buy 5 device same result.

or first lot is tester to customer.

please show picture test device to all people . export> import > import tuning file and show info in ktouch device >

I am test today in 1/8 note book can run program ktouch result=

device ok

export to pc ok


but tuning with winols or ecm=

import file to device checksum error {not extract header before tune}

or import ok {extrack header before tune} not start engine p0601 internal control module memory checksum error.


768kb no header insert to ecu ecu have 1 mb file .


how to merge header and tuning file to write in ecu????

no ds manager device not successful to export file. device not working

do you want to remote desktop to fix it ????

you can export file or import tuning file with id vehicle and header to device complete with k touch program info file id same original and car can start . I transfer money reward for you 300usd++++ 1000000000000%

cnt
22nd January, 2016, 07:38 PM
someone can upload the contents of the CD , my CD is damaged.

nunge111
22nd January, 2016, 08:08 PM
someone can upload the contents of the CD , my CD is damaged.

cd not damage but.....software damage

I test many install window . lucky % =1/50 windows run KTOUCH ok

without dsmanager device not support all file tuning to writing ecu

Result to working at current time with china new genius ( k touch ) without ds manager to seting file tuning = checksum error on import file to device or engine can not start p0601 or ecu damage.


Factory please help me. all customer hope to use it.

ovi730
24th January, 2016, 06:23 PM
in order to extract the correct file , you will need this tool :)

teamtuner
24th January, 2016, 06:33 PM
well post this program mr ovi730...or need to wait untill mr.nero...will post it?

ovi730
24th January, 2016, 06:46 PM
haha ........... man this is your playground too ? i have for those tools all solutions all firmwares all transformations from slave to master , even something more - ori kess :)

teamtuner
24th January, 2016, 07:08 PM
haha ........... man this is your playground too ? i have for those tools all solutions all firmwares all transformations from slave to master , even something more - ori kess :)
congratulations for your ori kess...if you need the other tools ori,let me know...i can give it all to you...i use better my clones...you know...i am a happy cloner-man

ovi730
24th January, 2016, 07:13 PM
to be a cloner is one thing to be a reseller is another thing . i have both ori and clone on the same sn.

teamtuner
24th January, 2016, 08:30 PM
maybe this will be usefull for chin@ guys to rewiev this tool...:)

https://mega.nz/#!MF5XVYYa!EXsAXf6YHR79AXki8uMl4fRztQ2JNEeOXsfS3QN yHOw

nunge111
25th January, 2016, 02:11 PM
How to use new genius to remap.

1 read data thoug obd and save file to device
2 connect with k touch program and export file to pc
3 use genfile extract ( ori genius file ) before tuning
4 after tuning import file to device with ktouch program and write to car

??????

Youneselm
25th January, 2016, 02:12 PM
Yes. And select work and programing on your genius

donovan2123
25th January, 2016, 03:44 PM
maybe this will be usefull for chin@ guys to rewiev this tool...:)

https://mega.nz/#!MF5XVYYa!EXsAXf6YHR79AXki8uMl4fRztQ2JNEeOXsfS3QN yHOw


What does this software do, does it remove the header genuis adds when reading a file and exporting from usb card?

Sent from my D6603 using Tapatalk

teamtuner
25th January, 2016, 03:46 PM
no...i think it do popcorn mate...:chuncky:...and cut headers:beheaded:

donovan2123
25th January, 2016, 04:26 PM
Brilliant, lol. So it does do headers.....

Sent from my D6603 using Tapatalk

nunge111
25th January, 2016, 06:02 PM
How to merge tuning file to header in ktouch device and write to ecu car ?

And how to edit checksum before import and import file method with winols to tuning file new genius?

Please help me.

donovan2123
25th January, 2016, 06:04 PM
You don't need header when writing back to the car. Checksum via winols if it is not done by tool

Sent from my D6603 using Tapatalk

nunge111
25th January, 2016, 06:18 PM
You don't need header when writing back to the car. Checksum via winols if it is not done by tool

Sent from my D6603 using Tapatalk

Isuzu transtron read with kess v2 1mb

But read with k touch = 768 kb

Original file complete vin software hardware number in info desscription

Export file tuning with winols and use porgram to import file to device no vin ecu number software none description no comment

How to setfile before and after tuning with winols?

donovan2123
25th January, 2016, 06:29 PM
Isuzu transtron read with kess v2 1mb

But read with k touch = 768 kb

Original file complete vin software hardware number in info desscription

Export file tuning with winols and use porgram to import file to device no vin ecu number software none description no comment

How to setfile before and after tuning with winols?
Is kess set to read full or part?

Sent from my D6603 using Tapatalk

donovan2123
25th January, 2016, 06:29 PM
Isuzu transtron read with kess v2 1mb

But read with k touch = 768 kb

Original file complete vin software hardware number in info desscription

Export file tuning with winols and use porgram to import file to device no vin ecu number software none description no comment

How to setfile before and after tuning with winols?
Also is genuis giving option to read full?

Sent from my D6603 using Tapatalk

nunge111
26th January, 2016, 01:41 AM
Also is genuis giving option to read full?

Sent from my D6603 using Tapatalk

How to setting device to read full i can not search in device to set read full option

Id

Reading

Writing

Recovey

Only function in device

nunge111
28th January, 2016, 08:01 AM
Finish day test

All test device ktouch

Result

Device ok

But do program non dsmanager

Checksum error writing tuning file to ecu car can not to start

It not work for all user it bad product

Without dsmanager device can not remap and tuning ecu.

Checksum error after writing ecu big problem.

Beware product at current time.

moky
28th January, 2016, 11:37 AM
and official genius make lot of checksum online so....

teamtuner
28th January, 2016, 01:05 PM
i am happy that i have not loose my money to buy this shi+

Plowman
28th January, 2016, 09:38 PM
Finish day test

All test device ktouch

Result

Device ok

But do program non dsmanager

Checksum error writing tuning file to ecu car can not to start

It not work for all user it bad product

Without dsmanager device can not remap and tuning ecu.

Checksum error after writing ecu big problem.

Beware product at current time.

Even using genuine Genius tool without checksum corrected files will give you problem!

OVERSPEED
28th January, 2016, 09:52 PM
and official genius make lot of checksum online so....

In this case why not do CKS via SW (WinOLS, ECM, etc for example) and write ? if I understood even without conection with server to make CKS in file it did write... the device could be used in this way... or it corrupted the CKS made with SW ?

pulsar2000
28th January, 2016, 11:20 PM
I know someone who had genuine and always chksum issue, i remember he said never hardly this tool chksum,,,,
sounds like a pile of steaming Shiiite this tool...

nunge111
29th January, 2016, 05:22 PM
In this case why not do CKS via SW (WinOLS, ECM, etc for example) and write ? if I understood even without conection with server to make CKS in file it did write... the device could be used in this way... or it corrupted the CKS made with SW ?

Winols checksum online not search .

Tuning complete not import to device checksum error.

Isuzu transtron 7058 1mb read with kessv2

Newgenius read 768 kb

donovan2123
29th January, 2016, 06:23 PM
Winols checksum online not search .

Tuning complete not import to device checksum error.

Isuzu transtron 7058 1mb read with kessv2

Newgenius read 768 kb
You may need to remove header before winols will find correct checksum. Or find Full original with sane hw and sw and tune that checksum and write back with genuis, it will still only write the part read from full file

Sent from my D6603 using Tapatalk

nunge111
30th January, 2016, 01:54 PM
You may need to remove header before winols will find correct checksum. Or find Full original with sane hw and sw and tune that checksum and write back with genuis, it will still only write the part read from full file

Sent from my D6603 using Tapatalk

How to find correct checksum

Ecm credit work or not ?????

moky
30th January, 2016, 05:59 PM
post file readed by genius clone please

nunge111
31st January, 2016, 11:29 AM
post file readed by genius clone please

http://en.file-upload.net/download-11263945/newgeniusreadisuzudmaxtranstron.rar.html

Thank you moky.please check file please help me .5 device i buy not working .

nunge111
1st February, 2016, 05:40 PM
768.368 kb ( info properties ) export to pc

Tuning with winols non checksum mode and save EXPORT FILE

768 kb in device ( info properties)

.368kb AND DESCRIPTION VIN eci id LOSS BEFORE EXPORT FILE WITH WINOLS

Program remove description on file automatic.

How to seting file before tuning and after tuning ??

youssef70
2nd February, 2016, 12:04 AM
768.368 kb ( info properties ) export to pc

Tuning with winols non checksum mode and save EXPORT FILE

768 kb in device ( info properties)

.368kb AND DESCRIPTION VIN eci id LOSS BEFORE EXPORT FILE WITH WINOLS

Program remove description on file automatic.

How to seting file before tuning and after tuning ??

insert FF fom 0 to 3ffff file will be reconized by winols
see attachement

nunge111
2nd February, 2016, 03:11 PM
insert FF fom 0 to 3ffff file will be reconized by winols
see attachement

Ok mate.i will to test it.

Choose all before export map with winols???

Stock file 768 kb

You edit file 1024 kb

teamtuner
2nd February, 2016, 09:51 PM
mates...again...can i ask you a favor?...who can upload the content of cd for this tool...?...i mean..look image

teamtuner
3rd February, 2016, 02:45 PM
nobody can do this?...mmm...nice help

Overtune
3rd February, 2016, 08:49 PM
Instead of installing old version of race evo software, i have installed the latest.
Now there are more realistic results about this tool.
As you can see in pictures, firmware on the device IS 5.005 and available protocols now display correctly on the k-touch software. 355819355820

Overtune
3rd February, 2016, 09:26 PM
Latest race evo Software + k-touch with instructions
http://expirebox.com/download/d869ccf12785ec618fd5b38a02b07f9e.html

Can someone please share raceloc dll with english and not chinese language?
Thanks

Overtune
3rd February, 2016, 10:21 PM
English version raceloc.dll
Copy Raceloc.dll to C:\Users\PC Name\AppData\Local\DimWare\RaceEVO\7.0
Press the thanks button :)355844

donovan2123
3rd February, 2016, 11:55 PM
English version raceloc.dll
Copy Raceloc.dll to C:\Users\PC Name\AppData\Local\DimWare\RaceEVO\7.0
Press the thanks button :)355844
Couldn't install on Windows 10, tried windows 7 compatible mode but still error. Once you acknowledge error it seems to continue to install and then completes but will not run just errors about key and there is no /dimware/RaceEVO/7.0 under local user, app data, local

Sent from my D6603 using Tapatalk

teamtuner
3rd February, 2016, 11:58 PM
mates...and without having this genius...you can not to use this race?...like winols ,swiftec or ecm?...need to be conected with interface?...in that case,can be conected with trasdata interface only?...can be used for working file readed by kess for example?...mmmm....

teamtuner
3rd February, 2016, 11:59 PM
Couldn't install on Windows 10, tried windows 7 compatible mode but still error. Once you acknowledge error it seems to continue to install and then completes but will not run just errors about key and there is no /dimware/RaceEVO/7.0 under local user, app data, local

Sent from my D6603 using Tapatalk
try to users administrator...andcopy diware also to user your name user

donovan2123
4th February, 2016, 12:01 AM
mates...and without having this genius...you can not to use this race?...like winols ,swiftec or ecm?...need to be conected with interface?...in that case,can be conected with trasdata interface only?...can be used for working file readed by kess for example?...mmmm....
So race Evo is not like winols, it only allows import and export of files from genuis

Sent from my D6603 using Tapatalk

teamtuner
4th February, 2016, 12:07 AM
there is an option to enjoy by file...but,you need interface conected....and it said that file you can find into ram1 or ram2...problem is:maybe conected trasdata interface,will allow to see that file?...mmm...or maybe using a kess with .ept file from genius(for driver interface)...???????...maybe

nunge111
4th February, 2016, 02:51 AM
import export ok with ktouch.

but can not seting file and complete verify file to write to ecu.

without dsmanager how to set file???

or manual set with winols???

poxxxy
4th February, 2016, 08:06 PM
Can't you just read file on the SD card? Cut header manually and write back to SD before upload. Make checksumm in winols? I heard genius is using same fw as kess again since 5.001 so appears it is a genius device. Whether "virtual read" is true about things on this. The actual area read by dimsport is always small and pathetic :D. It has its uses I guess.

Overtune
4th February, 2016, 10:08 PM
Race evo uses setting files in order to work. And you need valid license and hasp dongle in order to open the editor.

nunge111
5th February, 2016, 03:03 AM
I buy newgenius slave or master .
Dimsport send dongle with newgenius tools to me.

I can setting file with all export file with ktouch ????

Or can edit file on original tools only...?

nunge111
5th February, 2016, 03:31 AM
:grumpy::grumpy::grumpy:New genius ktouch china.
read stockfile ok.

Write stockfile ok.

Write modify file not working.

Factory on way to can build device to working ok.

Buy kessv2 master original best way .

And return ktouch device to factory dispute and refund money.

Overtune
7th February, 2016, 10:30 AM
If you have the means to recalculate the checksum of the modified file, on an external software, then, it is a good effort what they did...That is my personal opinion. I use genuine winols to recalculate the checksums of all my tunes... In the hands of a professional...this is a gift!

moky
7th February, 2016, 11:15 AM
if it's only checksum problem...

few protocoles are interesting ..if work

nunge111 did you flash ecu with checksum ok?

nunge111
8th February, 2016, 04:53 PM
if it's only checksum problem...

few protocoles are interesting ..if work

nunge111 did you flash ecu with checksum ok?

moky newgenius not work without dsmanager .

tutti file newgenius not checksum.

I open dispute return 5 device to supply refund money.

Overtune
8th February, 2016, 11:25 PM
I think you had too high expectations for just 400 EUR per clone...People pay 1000+++ EUR per year to subscriptions for genuine race evo software only.

nunge111
9th February, 2016, 03:50 PM
I think you had too high expectations for just 400 EUR per clone...People pay 1000+++ EUR per year to subscriptions for genuine race evo software only.

genius clone it bad device . factory not test before sale test in car read and write original file only .factory not test with tuning file.

469x5 device I ruturn device and refund money.

Overtune
11th February, 2016, 11:18 AM
Can someone please upload TF FIX folder from their genius cd? Mine has nothing inside...I need GENIUS.img for TF Card
Thank you

Overtune
11th February, 2016, 04:25 PM
Anyone??? Please share TF FIX folder thanks

moky
17th February, 2016, 05:08 AM
any news about genius and checksum problem?

someone can work with it ?

nunge111
17th February, 2016, 08:31 AM
any news about genius and checksum problem?

someone can work with it ?
return all and refund money.:stung::stung:

Speedofix
17th February, 2016, 09:08 AM
why not buy orginal tools ? One broken ecu and you have used money enough to buy real tools!

datapage
17th February, 2016, 11:32 AM
Genius muito bom como DS17, um bom peso de papel. ( made in china)

jancat
17th February, 2016, 03:09 PM
I think you had too high expectations for just 400 EUR per clone...People pay 1000+++ EUR per year to subscriptions for genuine race evo software only.

could you write modified files ?

Overtune
18th February, 2016, 04:08 PM
Sure I did. Just make sure your mod files are checksummed correctly.

OVERSPEED
19th February, 2016, 02:19 AM
Simos 12 and 18 work?

Overtune
19th February, 2016, 11:29 AM
Simos 18 tested ok. Don't know about simos 12

Shaheenem
20th February, 2016, 06:48 AM
How did you get original file for simos18?

Overtune
22nd February, 2016, 10:01 AM
From genuine dimsport server account.

jancat
3rd March, 2016, 10:11 PM
is there anyone have car list for this product clone ?

jancat
3rd March, 2016, 11:33 PM
and can I learn which seller did you buy from ? Do you have links ?

dave11674
4th March, 2016, 10:21 PM
so what we saying about this tool guys
its would make life just a little easier to be able to read teh ecu and save file to teh SD card and then xfer it when you get indoors

is it fixed yet or this tool not worth it ?

dave

pulsar2000
4th March, 2016, 11:55 PM
so what we saying about this tool guys
its would make life just a little easier to be able to read teh ecu and save file to teh SD card and then xfer it when you get indoors

is it fixed yet or this tool not worth it ?

dave

Avoid at all cost ! better to buy another Tool, kess v2

dave11674
6th March, 2016, 01:53 PM
i have kess2 clone
ktm
ktag
this would of bin nice as its portable :)

thanks for tips

dave

pulsar2000
6th March, 2016, 02:05 PM
Portable = Laptop and Kess v2, :> works for me,,,
know what u mean, just not what it seems, Pointless buy

dave11674
6th March, 2016, 06:17 PM
thanks mate
ill hold off for now then :)

dave

ahadi
7th March, 2016, 06:06 PM
Does it support edc7cp20 by obdii , if somebody test .

Thanks

satriawr
1st April, 2016, 11:31 AM
Hello, can i have the genfile extractor? I want to try this tools,... Thank you :)

moky
5th April, 2016, 06:16 PM
Here genfile extractor dude :stung:

moky
15th April, 2016, 12:51 PM
tested on many cars Kline an Can and work 100% fine only checksum need to do manually

Shaheenem
15th April, 2016, 01:35 PM
Tested any new cars that Kess 4.036 don't have?

moky
15th April, 2016, 01:43 PM
yes all simos,denso mitsu ..all ok

moky
15th April, 2016, 02:05 PM
369878

here pcb

DRACO21
15th April, 2016, 06:22 PM
Suport denso toyota ??

FIRW 5XXX 2016?

moky
15th April, 2016, 07:06 PM
no support toyota

OVERSPEED
16th April, 2016, 01:14 AM
Can do med17.5.2. Or 17.5.21 obd?

moky
18th April, 2016, 06:23 AM
obd only write this ecu (not tested)

moky
18th April, 2016, 08:49 AM
just tested on tricore edc17c10 all ok

Overtune
19th April, 2016, 08:09 PM
So far tested on:
EDC17C64 ID & WRITE ok (1.6TDI)
MED17.5.5 ID & READ & WRITE ok
ME7.5 ID & READ & WRITE ok
MED17.5.21 ID & WRITE ok
Sagem 3000 ID & READ & WRITE ok
Opel ME7.6.2 ID & READ & WRITE ok
Mercedes EDC16C2 ID & READ & WRITE ok
Simos 12 & 18 ID & WRITE ok
Checksum recalculated with Genuine Race Evo software for all of my tunes.

dave11674
19th April, 2016, 10:20 PM
hi guys

can you help me out here

i got one of these
doing a 2008 crafter VW van
edc16+c34 i beleive
so i read file
and transferred to my pc
got my guy to do dpf and egr off

but
when i try put the files back onto the unit its saying something about the checksum !!
my guy has done the checksum !!
i give him 2 files
one with header and one without
the one that has the GEN_FILE 7 header in the hex is not going back over to the unit !!
where the other one with no added header at the top has gone over just fine !

any ideas why ?

thanks

dave

Overtune
23rd April, 2016, 07:48 PM
Mod files transferred to the unit must not contain header.
I can check the checksum for you if you don't want to risk flashing it.

hugos31
25th April, 2016, 12:43 AM
support to trucks; cummins. volvo scania?

satriawr
25th April, 2016, 03:34 AM
Anyone have updated PRL files for this tools? I need for EMS2211 and Mitsubishi E6T78 series ECU,...

Overtune
25th April, 2016, 09:27 PM
Sure and i need a new espresso machine :)

Overtune
25th April, 2016, 09:28 PM
No only cars, bikes and lcv

satriawr
26th April, 2016, 02:51 AM
I guess only KTAG can read the EMS2211,... :(

Roydnier
1st May, 2016, 01:21 AM
Good afternoon, how to edit the file read with the NEW GENIUS china by WinOLS ?? how to remove the header to be recognized with the WinOLS and ecm Titaniun? and then return the file to be written with the new genius chines ??

satriawr
4th May, 2016, 08:22 AM
Good afternoon, how to edit the file read with the NEW GENIUS china by WinOLS ?? how to remove the header to be recognized with the WinOLS and ecm Titaniun? and then return the file to be written with the new genius chines ??

See the page before. One nice guy uploaded the header extractor software.

dave11674
10th May, 2016, 06:34 PM
no need to extract the headder
when you extract files form k touch to pc and it asks you if you want a headder just say yes
and it does not put a headder
if you say NO then it puts headder lol

dave

dave11674
10th May, 2016, 06:46 PM
can anyone point to bike pdf's ?
thanks

dave

moky
10th May, 2016, 08:09 PM
Someone tested token reset button on genius? here don't work, home version change but no token ..

dave11674
10th May, 2016, 08:57 PM
i tried mine earlier today
was on 27
mine has 2 switches at the bottom press the switch nearest leds on top
went back up to 30
press and hold switch, apply power, waited 10 seconds pulled power out and removed clip. power up and 30

dave

moky
10th May, 2016, 09:12 PM
work perfect thanks dave

satriawr
30th May, 2016, 05:02 AM
Tested on :
2014 Ford Fiesta Ecoboost 1.0 125hp auto
-> Read ok
-> Write ok
2013 Mitsubishi ASX/Outlander Sport 2.0 4B11 CVT
-> Read ok
-> Write ok
2014 Chevrolet Orlando 1.8 Petrol Auto
-> Read ok
-> Write ok
2015 Mitsubishi Montero Sport/Pajero Sport 2.5DiD 178hp auto
-> Read ok
-> Write ok

Astra69
6th June, 2016, 06:31 AM
Hi , can make Opel Zafira , Combo , Meriva Denso ECU ?

moky
7th June, 2016, 04:12 PM
yes it do them

OVERSPEED
8th June, 2016, 07:18 PM
So, the device is working good...worth buy it ?

moky
9th June, 2016, 07:35 AM
yes work fine but you need to do checksum before insert in genius

OVERSPEED
9th June, 2016, 01:14 PM
If you test MED17.5.2 with Tprot10 and work, please let me know !!!!

mahmoudsaq
13th June, 2016, 08:48 AM
Hello, I need help

I need read this module
http://uploads.tapatalk-cdn.com/20160613/17c3681eb914819a90cc1a4a32976cf0.jpg
http://uploads.tapatalk-cdn.com/20160613/6bd9997aa1b626689b3630114996d1c0.jpg

I dont now how connect and any adapter using
My kess v2 no not give me info

Please help

أرسلت من E6633 بإستخدام تاباتلك

teerak2uk
13th June, 2016, 10:52 AM
Hello, I need help

I need read this module
http://uploads.tapatalk-cdn.com/20160613/17c3681eb914819a90cc1a4a32976cf0.jpg
http://uploads.tapatalk-cdn.com/20160613/6bd9997aa1b626689b3630114996d1c0.jpg

I dont now how connect and any adapter using
My kess v2 no not give me info

Please help

أرسلت من E6633 بإستخدام تاباتلك
Maybe tell people what it is show picture from label on case!!!!!

remhonda
13th June, 2016, 04:27 PM
use k-tag... this TC1762, my k-tag very good read and write this unit..

moky
13th June, 2016, 04:48 PM
Tested today psa edc17c10 read on boot and test write by obd ok

OVERSPEED
28th June, 2016, 01:56 PM
Can someone help installing ?
Follow v?deo instructions, but it didnt create raceloc.dll at folder c:\admistrador\...\7.0

..tried create and copy to folder, but didnt work either

Program dont start

OVERSPEED
29th June, 2016, 01:40 AM
Nobody?

C'mon guys... Any hint !!!!!

OVERSPEED
30th June, 2016, 02:12 PM
Try uninstall, and install again... get error sentinel manager, can someone help at all ?

384167

janake
8th July, 2016, 02:31 AM
on XP? or win 7?

budG60
8th July, 2016, 09:46 PM
does anyone know a good download link for the TF-fix for the k-touch? My tool worked perfect since yesterday and now need to format the flash card but cannot find the correct link for the image file for the flashcard

OVERSPEED
10th July, 2016, 12:52 AM
on XP? or win 7?

XP...

Format c:
reinstall portuguese professional XP sp2, sp3 and still not working

When click, it begin to run (can see in control panel and disk beeing acessed) , but no work- and no error message

What i shall try ?

OVERSPEED
13th July, 2016, 08:34 PM
Latest race evo Software + k-touch with instructions
http://expirebox.com/download/d869ccf12785ec618fd5b38a02b07f9e.html

Can someone please share raceloc dll with english and not chinese language?
Thanks

Can someone repost this SW or provide working link (MP if you dont want to help chinese guys)

Overtune
16th July, 2016, 10:44 AM
Here proper software with installation guide made by me.
Press the Thanks button

http://expirebox.com/download/402145f88801a4181aa3d3b01d51810b.html

djdanny
16th July, 2016, 08:15 PM
Error: "protocol not enabled"
Gray auto icon.
TF card rewrite.
check picture.
please help me!
Thank you all!

OVERSPEED
20th August, 2016, 03:27 AM
MED17. 5.2 - Jetta tsi 2.0 tp8/10
Fail to Write, fail recover many times with fans on
Recover with original file worked

Mulatre
20th August, 2016, 11:57 AM
Here proper software with installation guide made by me.
Press the Thanks button

http://expirebox.com/download/402145f88801a4181aa3d3b01d51810b.html

Can you upload it again, please? Thanx!

OVERSPEED
22nd August, 2016, 03:53 PM
Anyone can help discover why could Write oem file but not the remaped.?

Cks Was made with ols extended rsa by the way

Overtune
22nd August, 2016, 06:01 PM
The file needs to be checksummed by RACE EVO software. Not with anything else. Since the tool bypasses the tprot by OBD, it needs special checksum correction only by RACE EVO software.
If you wish, send me your ORI + MOD and i can recalculate the checksum for you for free.

OVERSPEED
23rd August, 2016, 02:55 PM
Overtune, I?ll send you the files... we?ll talk by MP.

Only tricore protected ECU need this or all files need to be corrected by race ?

Overtune
26th August, 2016, 12:43 PM
Only the TPROT versions that this tool can do by OBD. Including EDC17 and Simos 12,18

aviation
31st August, 2016, 02:10 PM
Where do we get this tool?

aviation
1st September, 2016, 12:36 PM
http://www.aliexpress.com/item/New-Genius-Flash-Point-OBDII-BOOT-Protocols-Hand-Held-ECU-Programmer-Touch-MAP-Supprorted-All-Vehicle/32595194851.html?spm=2114.13010608.0.128.P6hqBJ

laytonanthony
1st September, 2016, 11:17 PM
Hey Guys
Brought a Genius Ktouch last week and arrived today.
Been using reworked kess v2, Ktag with KTM and MPPS v16 reworked. Betwen all 3 ive never not been able to do an ECU so far.
Attempting to use the genius tomorrow.
Installed all appropriate software.
When i read the ECU and save the file, i then open the ktouch software, got to explore and "read" folder then select the appropriate file i want to mod.
It then asks me to extract the header. From reading the forum its "Yes to NOT extract header?" and "NO to extract with header?"
Do i need to extract it with or without the header to mod the file? Do i need the genfile extractor once ive transfered file to pc.
if someone could just give me an idea on the procedure that would be great.
Kind regards
Ant

laytonanthony
3rd September, 2016, 10:25 PM
Ok
So I successfully remapped a range rover sport 2.7Tdi today with this tool.
First attempt I just assumed software did checksum. Started car and cut out within 5seconds. Second attempt I did checksums in winols and wrote back to car and everything was fine. My kess v2 read a 2mb file and the dimsport read a 256kb file but all the maps were in the read!

Overtune
5th September, 2016, 06:03 PM
Yes this tool does partial read on most ecus, not like kess v2.

dottecu
8th September, 2016, 01:17 PM
friends, if i buy new genius clone can correct checksum for ecu mareli 9gf fiat cars (family 0510) when tool write ? or i need 1st correct checksum whit other softwre and after i write?regard alex

moky
8th September, 2016, 06:01 PM
genius don't do any checksum must do with other Sw.

sugerfree
19th September, 2016, 01:49 AM
So it working fine for read/writing ecu files?
Confusing now, some said no not to buy it.
Please give me an idea to buy it no not.
the point is getting read ISUZU transtron for map edit.
Thanks

moky
19th September, 2016, 05:29 AM
yes it work

poxxxy
1st October, 2016, 01:24 PM
Received one the other day, just took the SD card out to try and read contents but seems they're using a slightly different protected FAT file system so old methods of reading SD card directly do not work. Seems the battery is toast as well as no voltage at all displayed in the battery test section despite physically checking it was connected today when opening it up. Overtune, I noticed you said you need to do CS by Race EVO and nothing else... I guess that means no ols checksum possible for some? I will have to get another laptop or something to install the software on so I can see if this thing is working or not.

moky
1st October, 2016, 08:09 PM
you can do 90% of checksum with winols except some med17,overtune will tell you more.

Overtune
2nd October, 2016, 08:08 AM
Exactly. Genius has a perfect feature. It can bypass TPROT security and allow to to flash TPROT ecus without having to open the ecu to unlock it at the first place. You just flash your mod by OBD like you would on any other non TPROT ecu. (Although on TPROT ecus reading function is not available)
But the problem is, that you need to checksum the file with Race Evo on these ecus. Anything else will not work.

poxxxy
2nd October, 2016, 07:46 PM
Is there an unexpired download link for the sw around? I don't have a cd-drive at the moment to install the software :(.

moky
3rd October, 2016, 06:06 AM
here software https://mega.nz/#!6d1kxCoa!WXqU_aIvYAHpgKBGrQOCnbZiShy9ycyQWUG7mOS xl-8

poxxxy
5th October, 2016, 11:53 AM
Thanks moky, I managed to get the sw from my CD. Not having any luck with install though. :(. Hardlock service error during install and SQL connection problems when attempting to run. (Windows 10 x64). Maybe a windows 10 problem?

moky
5th October, 2016, 11:55 AM
Never tested on windows 10 64..

poxxxy
5th October, 2016, 12:30 PM
Installed on XP in vm for now all ok.

Overtune
9th October, 2016, 08:16 AM
I run it on Windows 10 x64 with SSD hard drive.

satriawr
12th October, 2016, 07:55 AM
Tested on :
2016 Mitsubishi Montero Sport/L200 with 4N15 engine 2.4 DOHC MIVEC Turbo Diesel 181hp. Result :
Read -> OK
Write -> OK
2014 Chevrolet Spin 1.5 ECOTEC Petrol. Result :
Read -> OK
Write -> OK
2016 Chevrolet Trax 1.4 Turbo Petrol. Result :
Read -> OK
Write -> OK
2014 Chevrolet Spin 1.3 TDCi. Result :
Read -> OK
Write -> OK
2010 Mitsubishi Lancer GT 2.0 4B11 CVT. Result :
Read -> OK
Write -> OK

teerak2uk
12th October, 2016, 08:48 AM
Tested on :
2016 Mitsubishi Montero Sport/L200 with 4N15 engine 2.4 DOHC MIVEC Turbo Diesel 181hp. Result :
Read -> OK
Write -> OK
2014 Chevrolet Spin 1.5 ECOTEC Petrol. Result :
Read -> OK
Write -> OK
2016 Chevrolet Trax 1.4 Turbo Petrol. Result :
Read -> OK
Write -> OK
2014 Chevrolet Spin 1.3 TDCi. Result :
Read -> OK
Write -> OK
2010 Mitsubishi Lancer GT 2.0 4B11 CVT. Result :
Read -> OK
Write -> OK
Writing original or modded file?

satriawr
12th October, 2016, 09:57 AM
Original. Modded need checksum.

moky
12th October, 2016, 05:35 PM
this guy copy all..my photo and cars tested here....:D

http://blog.obd2express.co.uk/2016/07/04/k-touch-new-genius-ecu-chip-tuning-tool-test-list/

Overtune
15th October, 2016, 11:31 AM
He is not the only one...xexe chinese are unbelievable

satriawr
31st October, 2016, 05:22 AM
Testing BMW E46 318i, only pulled 128kb file. No checksum available. Damn,...

OVERSPEED
31st October, 2016, 11:37 PM
The file needs to be checksummed by RACE EVO software. Not with anything else. Since the tool bypasses the tprot by OBD, it needs special checksum correction only by RACE EVO software.
If you wish, send me your ORI + MOD and i can recalculate the checksum for you for free.

I recently bought a original Kess and can?t write too... did you try to write with genius and checksummed by race and it worked on MED17.5.2 ?

Overtune
5th November, 2016, 04:02 PM
Yes it did. Tested on MED17.5.21
MED17.5.25 is not supported on the chinese version. Only with genuine tool.

OVERSPEED
5th November, 2016, 06:33 PM
I mean 17.5.2, those with tprot 10 used in Jetta 200cv til 2013 and Passat with 211cv

satriawr
11th November, 2016, 02:33 AM
Is it possible to replace the TF card with something bigger (16gb prefered)? If so, how? Thanks.

satriawr
25th November, 2016, 10:14 AM
Anyone? Help please?

moky
25th November, 2016, 01:20 PM
https://www.youtube.com/watch?v=o1vyuvEG26g

ecutuners
27th November, 2016, 07:00 PM
You can't swap SD because SD CiD is stored inside NXP virtual eeprom (encrypted)

satriawr
28th November, 2016, 08:15 AM
So i have to clone the SD CiD?

teamtuner
28th November, 2016, 01:43 PM
So i have to clone the SD CiD?
impossible
is like you try to clone ADN (DNA) of your person....impossible
only china machine can duplicate same person more times...:chuncky:

simaservis1108
28th November, 2016, 01:52 PM
It is possible to clone CiD,but you need SD Card from China that has an EEPROM instead of PROM.

satriawr
29th November, 2016, 05:42 AM
Any info where to get that kind of sd card? Link? Thanks.

moky
1st December, 2016, 04:13 PM
Dimsport will add dongle for genius in future updates...finish clones.. Alientech will make same thing or only online work .... clone no future :D for them...it's time ...

TUNEDBYPOK
8th December, 2016, 08:24 AM
here software https://mega.nz/#!6d1kxCoa!WXqU_aIvYAHpgKBGrQOCnbZiShy9ycyQWUG7mOS xl-8
pass =
press

Overtune
12th December, 2016, 05:02 PM
Dongles can be emulated...

ecutuners
12th December, 2016, 06:17 PM
I have now solution to make new SD card working in genius kess Ktag etc even in original tools is possible to have a 2nd working SD now with much bigger GB size

satriawr
19th December, 2016, 10:34 AM
I have now solution to make new SD card working in genius kess Ktag etc even in original tools is possible to have a 2nd working SD now with much bigger GB size
How? Care to share please :D

Overtune
24th December, 2016, 12:22 PM
Anyone tested PSA DCM3.5?

moky
25th December, 2016, 09:10 AM
tested on rcz work fine you can go

evobag
26th December, 2016, 07:57 PM
tested on golf 7 gti 220HP simos18 NOT WORK !

Lucki1
27th December, 2016, 07:44 PM
hi. Today i got K-Touch from china. I tested on Med 9.1.1 audi q7 4.2 FSI.
Id and read ok. File is too big !!! Flash from this ecu is 2MB, K-touch read 2,48MB ? Why ? (
I cant write ori file 2MB ( i read by Ktag bdm)


Pls look on Video

http://sendvid.com/gbo1oynd



today i read edc17c19 opel insignia. work very fast

the same problem, first file is too small second too big ? why ?

Lucki1
29th December, 2016, 04:29 PM
any idea ?

budG60
2nd January, 2017, 08:39 PM
Do you see any information is in txt file you get when you id the ecu?

satriawr
5th January, 2017, 05:50 AM
Focus MK2 2.0 Petrol
-> Read OK 2MB File, full read (no partial reading)
-> Write - Ori file OK
- Modded File with CKS -> NOT OK, Engine start with DTC Throttle Fail
- Modded File with CKS write with KESS V2 OK
- Conclusion => Read Only, write ECU Error or worst BRICKED

Overtune
13th January, 2017, 02:52 PM
Audi Q7. File read with genius is 100% correct (size 0x27C000). KTAG 2mbyte area missed the immo area, so it is totally a bad reading.
Insignia EDC17C19 correct file size is 0x200000
You are messing with files read with different tools. You will possibly brick an ecu.

Overtune
13th January, 2017, 02:55 PM
Your checksum was badly calculated. I have done this ecu without issues.
You can do this to check. Flash your mod with KESS v2.(It automatically fixes the checksum even if you think it is calculated correctly)
Then read your mod with Genius and flash it. I am pretty sure it will work just fine.

Overtune
13th January, 2017, 03:02 PM
tested on golf 7 gti 220HP simos18 NOT WORK !

I can confirm this. Since the protocol enabled is an old version, it doesn't cover all file sizes.
You get "incorrect file size" error when you try to upload the file to the ecu.

Overtune
13th January, 2017, 03:04 PM
Testing BMW E46 318i, only pulled 128kb file. No checksum available. Damn,...
This is because you are using another software rather than RACE EVO to recalculate checksums.
I have done this ecu without issues.

ecutuners
13th January, 2017, 05:04 PM
Or you can fit that nxp and micro SD into your kess pcb and then it will read full file using Ksuite. Tested . Reading full files and Ksuite is making checksum for you.

turboracing
17th January, 2017, 06:36 PM
Ecu tuners This is cool but what about when tokens run out ? i might do this swap

ecutuners
17th January, 2017, 07:18 PM
You have to fit the extra pcb too, it needs 3.3v ground and RX TX

turboracing
17th January, 2017, 07:29 PM
Ok i take a peak inside and deside what to do about it ( but how about token ? )

ecutuners
17th January, 2017, 07:55 PM
Extra pcb is resetting tokens

jorge antunes
23rd January, 2017, 11:28 PM
Dear friends !
I bought a k-touch made in china and needed to rehearse several uce engines on the bench:
Handle has the pinnout cable or more suitable
Has a user manual

423492

evobag
24th January, 2017, 08:28 PM
I can confirm this. Since the protocol enabled is an old version, it doesn't cover all file sizes.
You get "incorrect file size" error when you try to upload the file to the ecu.

Yes I have exactly this error!
Do you have a solution ?
thank you

masterb
2nd February, 2017, 09:46 PM
can anyone tell me the ecu list compare to kess software 2.08 or 2.22 ?

cp2010
2nd February, 2017, 10:04 PM
can anyone tell me the ecu list compare to kess software 2.08 or 2.22 ?

new protocol in v2.23:
480, 427, 512, 370, 182, 232, 423, 223, 484, 492, 515, 518, 503, 260, 522, 345, 438, 300, 280, 538, 372, 437, 511, 534, 365, 299, 513, 493, 321, 329, 497, 523, 279, 349, 539,
500, 432, 291, 309, 417, 366, 455, 356, 502, 496, 330, 519, 464, 475, 429, 292, 416, 524, 504, 476, 514, 495, 276, 385, 478, 320, 516, 494, 525, 483, 482, 224, 295, 458, 410,
461, 462, 463, 537, 479, 326, 325, 536, 486, 471, 460, 240, 431, 433, 498, 487, 506, 445, 490, 526, 535, 531, 302, 285, 472, 183, 162, 481, 358, 521, 527, 528, 529, 530 , 344,
474, 448, 353, 517, 470, 510, 501, 459, 533, 499, 468, 467, 466, 477, 465, 469, 473, 505, 310, 520, 488, 489, 424, 508, 507, 444

masterb
3rd February, 2017, 08:29 AM
Ok so NG is same as 2.08.. nothing more..

Overtune
4th February, 2017, 06:47 PM
You have to fit the extra pcb too, it needs 3.3v ground and RX TX

There is no extra pcb inside Genius clone. Its empedded to the genius pcb.
What extra pcb are you talking about? The one used on chinese kess v2 with fw 4.036 ? Will it work with different firmware?
Thanks!

Joe1986
4th February, 2017, 08:07 PM
I have a New Genius Clone for sell, if somebody need. Its brand new !!!

Overtune
12th February, 2017, 11:34 AM
new protocol in v2.23:
480, 427, 512, 370, 182, 232, 423, 223, 484, 492, 515, 518, 503, 260, 522, 345, 438, 300, 280, 538, 372, 437, 511, 534, 365, 299, 513, 493, 321, 329, 497, 523, 279, 349, 539,
500, 432, 291, 309, 417, 366, 455, 356, 502, 496, 330, 519, 464, 475, 429, 292, 416, 524, 504, 476, 514, 495, 276, 385, 478, 320, 516, 494, 525, 483, 482, 224, 295, 458, 410,
461, 462, 463, 537, 479, 326, 325, 536, 486, 471, 460, 240, 431, 433, 498, 487, 506, 445, 490, 526, 535, 531, 302, 285, 472, 183, 162, 481, 358, 521, 527, 528, 529, 530 , 344,
474, 448, 353, 517, 470, 510, 501, 459, 533, 499, 468, 467, 466, 477, 465, 469, 473, 505, 310, 520, 488, 489, 424, 508, 507, 444


One of my dealers had the chance to test your KESS V2 fw 5.017, and guess what...Same problem as GENIUS KTOUCH clone. The 5.017 firmware doesn't support SIMOS 18 fully. On ecus, with file size 0x480000 it gives an "Incorrect file size" error, just like the Genius clone. I don't see why, anyone should choose this tool over the Genius clone, apart from the automatic checksum recalculation feature.

satriawr
16th February, 2017, 05:00 AM
Just bought myself PCMFlash and genuine tactrix. Works welll. Thank you NG Clone for helping me buying genuine tools,... :D

jorge antunes
25th February, 2017, 06:20 PM
Hello friends
I have k-touch (New Genius) if I change the original file in winols how to export to k-touch:
Already tried but a bug can help

How to work with soft new genius extractor gene file!!!!

best regardds

OVERSPEED
29th March, 2017, 12:13 PM
Me7.9.10 dont worled (security acess)

moky
29th March, 2017, 06:20 PM
jorge antunes , just change name of your file with simple name ,some caracters don't pass with this soft

OVERSPEED
29th March, 2017, 07:23 PM
only letters, numbers and space in name

satriawr
30th March, 2017, 03:19 AM
Mine still working well. After 7x reseting the token counter. Lol.

OVERSPEED
30th March, 2017, 01:58 PM
what cars/protocols have you tested till now satriawr ?

masterb
30th March, 2017, 02:10 PM
Mine still working well. After 7x reseting the token counter. Lol.
So you work with newgenius and pcm Flash?
How cks on ng?
Winols...or ?

Thanks

moky
30th March, 2017, 03:43 PM
Personaly i make checksum with Ols for genius (but sometime no work) and pcm flash make checksum when flash for 90% ecu.

satriawr
31st March, 2017, 10:18 AM
what cars/protocols have you tested till now satriawr ?
Mitsubishi Denso RA6 513
Mitsubishi M32 417
Toyota Denso Can 395
Ford Bosch EDC16C7-7 277
KTM Keihin KLine 411
GM Delco E78 369
Mazda Denso 416
Renault Kerax TRW 103



So you work with newgenius and pcm Flash?
How cks on ng?
Winols...or ?

Thanks
Winols is good. But several cannot checksum.

poxxxy
5th August, 2017, 06:51 PM
10 months later... finally tested it today on old Simos 7.1, all ok!

satriawr
14th September, 2017, 08:22 AM
Anyone have latest race software for this tool? Can upload it please?

poxxxy
26th January, 2018, 08:40 PM
Well... today it let me down, tried to read a mk1 Focus RS, wake up error... ori Kess Slave of a friends didn't seem to want to read either... it tells you to turn off the dashboard and then it pretends to read for 30 seconds before then telling you to turn on the dashboard and then k-suite froze/crashed back to the protocol selection screen.

poxxxy
11th April, 2019, 02:31 PM
EDC17C46 VW Scirocco 2012... Anyone tested? Would like to flash over OBD with race evo patch for OBD writing but when ID'ing reports unknown ECU. Anyone tried it? Not sure I fancy the risk atm! Trying to get hold of a Kess V2 genuine or new genius :).

edz0n
20th April, 2019, 12:25 AM
Helo any one can upload set files to race 2000? please
If any one need race 2000 working only lef some set files 613663


613664

any one can upload set file to bmw 530d e60 905 or upload pack set.

tkmmazda
27th April, 2019, 06:54 AM
Hello,

Where can I buy this shop at a normal price? I can't find a seller who has it in stock.

tkmmazda
16th May, 2019, 02:50 PM
Hello, very much for your help.
He bought KTouch, the CD is unreadable. I need complete software.
Please, please

pittyxp
28th May, 2019, 12:32 AM
Hi guys!!!! Ineed help, please please please......

I read the thread for the new genius. I have a problem with an OPEL ANTARA 2.2L 16V CDTI 2WD 120kW/161HP DCM3.7 software version 0180551DAB and update version 01805526AB.
I deleted the DPF from the original file but the new genius tells the checksum could be not correct.
Can I proceed to write the mod file? How can I check if the checksum is correct?
I read you wrote the checksum must be calculated only with RACE EVO software that I haven't.

Please, help me as I'm really stuck with my friend.
do you know if I can rewrite the original file after writing a mod file with a wrong checksum?

moky
28th May, 2019, 05:37 AM
Post file in chiptuning section and ask for checksum after you can flash without problem.checksum can be calculate with winols.

anutpeach
22nd June, 2019, 04:10 PM
i think about buying a new tool for my own cars and friends only - especially for newer cars 2014+.
Any News here for New Genius compared to Kess v2? (china clone)
the Genius sounds nice to make new VAG via OBD!? does that work, or still only via boot mode?
the kess is a good clone tool, but can we say the new genius clone is an update?
thanks for your reply.

anutpeach
22nd June, 2019, 05:08 PM
doublepost removed

kdane93
8th November, 2019, 06:19 PM
Hi, have Problem with my K-Touch.
Software only shows wrong Customer Code and Device says Device not enabled.
Just got it used today

Thanks

TSC2010
8th November, 2019, 09:03 PM
China sell New Tool ---> NEW GENIUS

349080

http://www.obd2express.co.uk/wholesale/genius-flash-point-obdii-boot-ecu-hand-held-chip-tuning.html

If Anybody need this tool i have to sell one... contact me pm