PDA

View Full Version : leon fr 1.9 170cv



xpto
7th January, 2016, 01:02 AM
hello.can someone make dpfoff to this file?its siemens ppd1.2.tanks in advance

draganelektricar
7th January, 2016, 01:18 AM
file test,dpf off..

xpto
7th January, 2016, 01:37 AM
ok.gonna test and then report

xpto
7th January, 2016, 11:38 AM
hello again.car still smokes a litle at idle,and sometimes give error p0473.do you have another solution?or if someone else have a tested solution please give me a help.

draganelektricar
7th January, 2016, 12:47 PM
Try this file..

xpto
7th January, 2016, 01:46 PM
ok.gonna try

xpto
7th January, 2016, 02:18 PM
sorry but no work.lots of smoke at idle

xpto
7th January, 2016, 05:03 PM
anyone can help?

milanocito
7th January, 2016, 06:21 PM
here dpf

pass pm

xpto
7th January, 2016, 08:31 PM
sorry but your file is the same as draganelektricar. (http://www.digital-kaos.co.uk/forums/member.php/261680-draganelektricar)

draganelektricar
7th January, 2016, 09:26 PM
ECUSOFT- ATR.
OK SOFTWARE.
ANY OTHER PROBLEM IN CAR

Fantomisback
7th January, 2016, 10:49 PM
u have problem with injecrtors or maybe egr is no good

xpto
8th January, 2016, 02:37 PM
in injectors reading i see 0,22 in all 4 .is it normal?

Tes1a
8th January, 2016, 08:43 PM
block EGR with metal

xpto
9th January, 2016, 11:15 AM
ok.ive tested injectors and they are fine,check egr and its fine to.put back original file and error p0473 exaust pressure sensor-signal too high came up and is alway there.check the wires and they are ok.do i realy need to put a new sensor even with dpfoff file?cant see anytingh else to cause this problem.can anyone confirm this?

egyclick
9th January, 2016, 12:33 PM
test this one

xpto
9th January, 2016, 12:39 PM
i already tested this file.for me is good but i think i must replace dpf pressure sensor it smokes a litlle at idle

CustomCars
9th January, 2016, 12:48 PM
ok.ive tested injectors and they are fine,check egr and its fine to.put back original file and error p0473 exaust pressure sensor-signal too high came up and is alway there.check the wires and they are ok.do i realy need to put a new sensor even with dpfoff file?cant see anytingh else to cause this problem.can anyone confirm this?

Sure your njector is fine. I hear many times about that problem with bad solution. PPD is not so easy what many people know (using automaticaly software)
Can check measure for DPF diferential sensor ?

Dont replace it, money lost

xpto
9th January, 2016, 03:59 PM
no it cant measure.on dtc is says signal too high.can you make a dpfoff for this car or do you know someone that can make it 100% ok?

CustomCars
9th January, 2016, 04:49 PM
no it cant measure.on dtc is says signal too high.can you make a dpfoff for this car or do you know someone that can make it 100% ok?

yes can but for that you must get out ecu from car.

xpto
10th January, 2016, 01:47 AM
ok.what do you need?epron and flash?this is flash and eprom bdm reading.if someone can make it 100% i apreciate help.thanks