PDA

View Full Version : berlingo edc16c34 with ktag



totalkey
7th January, 2016, 12:36 PM
hello all, i just gor my new ktag and i trying to play with edc16c34, now i destroyed bdm pads, so it is possible to do it boot mode?

thanks

nikobg
7th January, 2016, 12:47 PM
not posible boot mode only bdm or obd

totalkey
7th January, 2016, 12:48 PM
And in trasdata?
Anyone got pins for boot?

mihaiservice
7th January, 2016, 01:14 PM
Hi
already you have got the answer ! all edc16 only via BDM ,dont exist edc16 witch can be read in boot mode !

totalkey
8th January, 2016, 09:35 AM
Anyone can show me the best way to solder the bdm cable?

teamtuner
8th January, 2016, 02:08 PM
why you need full read of this ecu?
is not enough obd read?

totalkey
8th January, 2016, 02:09 PM
why you need full read of this ecu?
is not enough obd read?
I am just tried to see how it's read bdm, because I a begginer in this field

teamtuner
8th January, 2016, 06:58 PM
ah...well...better try another ecu with good pads and use the bdm frame with dima...or,you can try to look the pinout from fgtech by instructions and find the coresponding pads where to salder wires....but...mmmm...

totalkey
8th January, 2016, 07:14 PM
ah...well...better try another ecu with good pads and use the bdm frame with dima...or,you can try to look the pinout from fgtech by instructions and find the coresponding pads where to salder wires....but...mmmm...
Manual of ktag said using similar to this for edc16. https://uploads.tapatalk-cdn.com/20160108/0680df05a20824f5cbc8694cd29a3468.jpg But I found it hard to solder so I was trying strip the ribbon cable edges and solder direct to bdm pads but I found that it shorting in some points

teamtuner
9th January, 2016, 02:44 PM
mate...use dima...it has pins...no need to salder

totalkey
9th January, 2016, 02:44 PM
mate...use dima...it has pins...no need to salder
My friend, what is dima?

totalkey
9th January, 2016, 02:51 PM
Sorry you mean bdm frame and adaptor, I ordered one from china, thanks

CustomCars
9th January, 2016, 03:16 PM
Send photo of broken pads maybe its possibility to make it working.

totalkey
9th January, 2016, 03:21 PM
Its just extra ecu for tests, nothing important,. Thanks

Ginocar
13th January, 2016, 07:07 AM
Anyone can show me the best way to solder the bdm cable?
Hi,
Here is the BDM pinout of all Bosch EDC ECU
351478