View Full Version : PSA 207 Need to 143000KM but swop always back!
einet
8th January, 2016, 08:09 PM
Hi
I have PSA207 from 2008 and make Dash - BSI - ECU with NYO2015
and when conect cames alwasy back!
I have tray also both versions DASH and ECU DASH is only 1 version.
Old KM 235289
NEW KM 143000
How can correct me this files so that i dont open another time?
thanks350726
juancho18
8th January, 2016, 09:44 PM
Please load original files
ecu
dash
bcm-bci
einet
8th January, 2016, 09:48 PM
this are all orguinal files!
Dash have normal read and 8 bit read.
BSI and ECU is normal read
juancho18
8th January, 2016, 09:51 PM
try and reports
dominatori
8th January, 2016, 10:40 PM
Try and report350756
drz
8th January, 2016, 10:44 PM
Here is one more
mohamed_dz
8th January, 2016, 10:54 PM
Hi
I have PSA207 from 2008 and make Dash - BSI - ECU with NYO2015
and when conect cames alwasy back!
I have tray also both versions DASH and ECU DASH is only 1 version.
Old KM 235289
NEW KM 143000
How can correct me this files so that i dont open another time?
thanks350726
HELLO
try and report new v 143000
einet
8th January, 2016, 10:56 PM
how you have calculate this?
I see mutsh difrence with my maked with NYO4!!!!
einet
9th January, 2016, 07:28 PM
HELLO
try and report new v 143000
You files whose wrong! "134000"
I have make this ~~~~ car 6 times! test all files from forum but some whose not correct, or ECU or BSI or Historical....
!!!!This car haved satyed on PSA for 2 weeks to eleminate CAN problems.!!! MYBE UPDATES???
On the end i have made:
Dash Digiprog
ECU take "mohamed_dz" file and use V5 from Nyo to correct it to 143TKm.
BSI take my org file and put to "0".
Than i have confirm and reset all with lexia and all OK.
Thanks all for helping
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.