renault kangoo pin

[redash]

Hi there mates, im having a strange problem in hands with a renault kangoo 1.5dci year 2010 ecu Delphi dcm 1.2, going to start the story from the begining:

1- the auxiliar belt as broken and my client still drive to home...after he stop the car and replace the belt the car never work again
2- after diagnose with clip there is a error on ecu df038 (2def) injector codes are all with the same number and vin as disaper and i cannot reprogram them..and on uch protction parameters ET229- not registered ET046-active
3-so im trying to register the ecu to uch, but my problem is uch jonhsonControls have the eeproom st95160 and i don?t know if the pin i?m calculating is correct

in attachment i provide the bdm of ecu+ecu95160eproom+orig reading of 95160 (uch) can someone calculate the right pin for me??? (i have tried with renault pin extractor2 but on the database says kangoo 2007-> have eeproom 95080)

Many thank?s in advance

350860350861350862

[Bllinda]

try .... 4A.....
or .... A0....
maybe .... C7....

[Bllinda]

There are two keys. key id xx.xx. or xx.xx ????

[redash]

hi there my friend, yes the car as 2x keys programed....i have tried calculated the incode with renault pincode extractor2 with the 3 combination of pins that you gave-me butt no luck :( ..... tomorrow i will try with a incode generated by a friend that work at renault and them i report....many thank?s for your time

i have managed program, i only have shure of incode and outcode.....butt in reverse calculation that?s the pin that i got ;)


351078

[redash]

so to solve my df038 (2def)

1-match uch to ecu
2-program vin in ecu
3- code injectors
all done

[Bllinda]

Figure out how to I.S.K.code? Thx

[redash]

i think the ISK is 3C.50.E3.2D.02.94 ...from what i have read is the values from 18 to 23, see my attachment :)



351294

[Bllinda]

What Calculate pin? Me and feel your way .... Thx



i have managed program, i only have shure of incode and outcode.....butt in reverse calculation that?s the pin that i got ;)