PDA

View Full Version : Jeep 2.5TD IMMO OFF 0281001437



pozoko
11th January, 2016, 09:10 PM
Dear mates,

Could someone give tested file solution for this IMMO?
How I need to write eeprom? write protected?
How to connect the eeprom to mainboard? lift pin 7 and joint to 8?

351195

Thanks in advance.

regards,

byati
11th January, 2016, 09:38 PM
insert the ignition key into the driver door from the outside. open and hold open while turning the locking portion and expect to hold down Zealand conversion into locking position. Let's look at your vehicle will react. expect the same situation in the ignition switch on the ignition plug holding down a career as well.


DTI diesel engine with the same ECU. The file in addition to a new 24c16 eprom. Combine this with the pin EPROM 7. Lift 8. pin, 59-pin cut immonde.


results of the summer.

pozoko
11th January, 2016, 10:20 PM
Many thanks friend.

I have some questions.:

the correct eerpom is 24c04 right?
do I need to programm the eeprom with write protection?
lift pin 7? and joint 7 and 8?

Thanks again

byati
12th January, 2016, 10:36 AM
Yes

Lift pin 7 and joint pin 8

mamanacusa
6th May, 2017, 02:25 PM
This worked?

Thanks in advance

TETE88
19th November, 2018, 10:45 AM
[QUOTE = byati; 2681546] inserte la llave de encendido en la puerta del conductor desde el exterior. abra y mantenga abierto mientras gira la parte de bloqueo y espere mantener la conversión de Zelanda en la posición de bloqueo. Veamos cómo reaccionará tu vehículo. espere la misma situación en el interruptor de encendido en el tapón de encendido que también mantiene una carrera.


Motor diesel DTI con la misma ECU. El archivo además de un nuevo 24c16 eprom. Combine esto con el pasador EPROM 7. Levante 8. pasador, corte de 59 pines inmadura.


Resultados del verano. [/ CITA]


hello password please!

gmb45
19th November, 2018, 10:48 AM
English only :rulez: !!!

catalindubina
3rd April, 2019, 12:43 PM
Hello! Pass please
Thx

autorisp
30th May, 2019, 05:24 PM
Can I have password, please?