I must be doing something wrong!

[steve3123]

Well guys i downloaded and installed the firmware, and reconnected the box up. i scanned the network and again only found 10tp's for te/west. I scanned chrous, my box found 189!!
I set it to scan all tp's in network. Still no channels found. Signal strength is dancing anywhere between 1 and 99.
My box says its running this: sw version pv 1.0.00
Hardware version V1.0.0
software dated 20/09/07.

Even though im not super clued up on this yet, i figure the box should pick up something. watchable or not.

By the way the box is an A700c kryptview alnet. :stupido:

[wilf]

Well guys i downloaded and installed the firmware, and reconnected the box up. i scanned the network and again only found 10tp's for te/west. I scanned chrous, my box found 189!!
I set it to scan all tp's in network. Still no channels found. Signal strength is dancing anywhere between 1 and 99.
My box says its running this: sw version pv 1.0.00
Hardware version V1.0.0
software dated 20/09/07.

Even though im not super clued up on this yet, i figure the box should pick up something. watchable or not.

By the way the box is an A700c kryptview alnet. :stupido:

you need to scan for your area, what was it before it became virgin media are you in uk or ireland?

[steve3123]

you need to scan for your area, what was it before it became virgin media are you in uk or ireland?

birmingham UK :proud: telewest.

[wilf]

so telewest is what you need to scan on, not the chorus. if you still cant get 34 plus tps then i would maybe try another firmware myself to see if the result is the same, any since 28/11/08 will do for the A700

[steve3123]

so telewest is what you need to scan on, not the chorus. if you still cant get 34 plus tps then i would maybe try another firmware myself to see if the result is the same, any since 28/11/08 will do for the A700



okey dokey. will report back and see whats going on later..