EVC electronic KEY 600

[pipina]

354341354342
Hi, I have here XC90 with EGR problem and I want to read flash memory, but car was tuned and protection - EVC electronic KEY 600 agains reading AM29F400 was puted in ECU. Anyone know how to bypass it and read file corect not cripted ? I try few files from my base and here from DK but nothing 100% working (AC, transmision, dashboard,...)

VOLVO XC90

EDC15C11
2003
120kW
automatic
AWD

regards

[carmageddon]

desold adapter and place it on table-programmer, read flash, save it, find original file, compare file.

[pipina]

https://www.evc.de/en/product/keys/keys.asp

[kennfeld]

desold adapter and place it on table-programmer, read flash, save it, find original file, compare file.



should not work the key encrypt data only the one that encrypt the file can d?crypt it

[pipina]

Any one with original file ?

[carmageddon]

should not work the key encrypt data only the one that encrypt the file can d?crypt it

i read always the flash on programmer with adapter, you can read it without problem because the data for mpc are ALWAYS decrypted (and are decrypted for mpc as the programmer), otherwise the ecu dont work...the adapter key are only for encrypt data on flash and not for mpc or programmer!
i read files from apr, revo, mtm with this solution.

[carmageddon]

Any one with original file ?

desolder adapter, place adapter and flash on programmer and read it with programmer, send here the file and wait

[pipina]

354486

readout of flash from adapter

[tehnosoftex]

Or you can try to read it in boot mode. It might work.

[carmageddon]

354486

readout of flash from adapter

the flash encrypted is useless!

i wrote that you must desolder adapter and place on programmer for read flash decrypted

i try boot mode (as technosoftex wrote) for me7 and edc15 with encrypter but dont work

[pipina]

boot mode - don't work I try it

[ecutuners]

Mate the guy has told you how to read it, put the whole pcb to the programmer not just the flash chip it works I've done it before with Apr pcb

[pipina]

354604

read with adapter

[carmageddon]

BAD READOUT!

file corrupted

[pipina]

I try with 2 programer always same readout file - all conection are soldered

anyone have file to test on car ? Label of ecu is in post #1

[pipina]

solved with new EGR valve