View Full Version : EVC electronic KEY 600
pipina
27th January, 2016, 02:42 PM
354341354342
Hi, I have here XC90 with EGR problem and I want to read flash memory, but car was tuned and protection - EVC electronic KEY 600 agains reading AM29F400 was puted in ECU. Anyone know how to bypass it and read file corect not cripted ? I try few files from my base and here from DK but nothing 100% working (AC, transmision, dashboard,...)
VOLVO XC90
EDC15C11
2003
120kW
automatic
AWD
regards
carmageddon
27th January, 2016, 06:23 PM
desold adapter and place it on table-programmer, read flash, save it, find original file, compare file.
pipina
27th January, 2016, 07:50 PM
https://www.evc.de/en/product/keys/keys.asp
kennfeld
27th January, 2016, 08:17 PM
desold adapter and place it on table-programmer, read flash, save it, find original file, compare file.
should not work the key encrypt data only the one that encrypt the file can d?crypt it
pipina
27th January, 2016, 08:29 PM
Any one with original file ?
carmageddon
27th January, 2016, 08:45 PM
should not work the key encrypt data only the one that encrypt the file can d?crypt it
i read always the flash on programmer with adapter, you can read it without problem because the data for mpc are ALWAYS decrypted (and are decrypted for mpc as the programmer), otherwise the ecu dont work...the adapter key are only for encrypt data on flash and not for mpc or programmer!
i read files from apr, revo, mtm with this solution.
carmageddon
27th January, 2016, 08:48 PM
Any one with original file ?
desolder adapter, place adapter and flash on programmer and read it with programmer, send here the file and wait
pipina
28th January, 2016, 08:31 AM
354486
readout of flash from adapter
tehnosoftex
28th January, 2016, 09:14 AM
Or you can try to read it in boot mode. It might work.
carmageddon
28th January, 2016, 10:03 AM
354486
readout of flash from adapter
the flash encrypted is useless!
i wrote that you must desolder adapter and place on programmer for read flash decrypted
i try boot mode (as technosoftex wrote) for me7 and edc15 with encrypter but dont work
pipina
28th January, 2016, 10:24 AM
boot mode - don't work I try it
ecutuners
28th January, 2016, 10:56 AM
Mate the guy has told you how to read it, put the whole pcb to the programmer not just the flash chip it works I've done it before with Apr pcb
pipina
28th January, 2016, 06:49 PM
354604
read with adapter
carmageddon
28th January, 2016, 09:33 PM
BAD READOUT!
file corrupted
pipina
28th January, 2016, 10:23 PM
I try with 2 programer always same readout file - all conection are soldered
anyone have file to test on car ? Label of ecu is in post #1
pipina
1st February, 2016, 03:55 PM
solved with new EGR valve
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.