PDA

View Full Version : 2011 Ford Galaxy DCM 3.5 HW: BG91-12A650-PG_SW: BG91-14C204-CM ORIGINAL NEEDED!!



Remapking
28th January, 2016, 03:54 PM
Hi Guys really need original flash file urgently, hope you can help

Ford galaxy 2.0tdci 140hp

DCM 3.5

HW: BG91-12A650-PG

SW: BG91-14C204-CM


Many Thanks

Remapking
29th January, 2016, 12:13 PM
please can anyone help with this, customer is going nuts

thanks

Remapking
1st February, 2016, 03:20 PM
still need help for this file please

wiski
1st February, 2016, 04:19 PM
What happened in first place?
Did you try with ids?
You got any read out from it?

Remapking
1st February, 2016, 05:09 PM
What happened in first place?
Did you try with ids?
You got any read out from it?

Hi the car is in a garage, when I got there it had some dtcs (relating to exhaust temp too high during regen) - car would not start (NO CRANK) and faults could not be erased (garage told me they were able to clear faults before and car would start - now faults cannot be erased..

I read the flash and removed the DTC's wrote back and car started fine, then started to hunt after a while, we then removed dpf from car and ecu - still same, car starts them after a while begins to hunt (with no pedal control) - shows no dtcs

have rechecked timing etc all spot on

I need an original flash to start with - not the one I have read as it has DTC's which do not allow car to crank


any thoughts as getting really desperate on this one...


thanks



SOLVED!!!! - sorry for delay in replying turns out it had a short in the engine loom!!

wiski
1st February, 2016, 05:16 PM
You can go to dealer if you don't have ids and let them update it. Anyway put the file you have read if i can compare with files i have maybe i can help you out.

Remapking
1st February, 2016, 06:04 PM
You can go to dealer if you don't have ids and let them update it. Anyway put the file you have read if i can compare with files i have maybe i can help you out.

original file with DTCs + id attached

Thanks

wiski
1st February, 2016, 06:46 PM
You probably also checked oil level as they do now to throw lot of diesel in it.

Remapking
2nd February, 2016, 03:37 PM
Hi do you know what HW/SW number this file is?

thanks

wiski
2nd February, 2016, 03:46 PM
This is your file.

Remapking
2nd February, 2016, 04:31 PM
So this is same hw/sw as my file?

Thank you so much I appreciate your help and time a with this

pocinas
7th November, 2019, 03:11 PM
Hi there lads.

I looking as well for this ECU

Oryginal file, or any but BDM (ktag)

HW: BG91-12A650-PG
SW: BG91-14C204-CM
VIN nr.: ...........
SW ver.: 6165LA11260018
Spare: BG91-12A650-PM
Engine:
HW Ver.: BG91-12A650-NF


anyone can help?