files immo off 100% sirius32

[neimy]

for all files immo off 100% for ecu sirius32

[autocargo]

Using same file for all ecu's is no good, you'll find out that car will be running bad, loosing power, etc.... There are many software version and some are incompatible... Always use original file to immo off.

[stoyanov]

Using same file for ecu's you'll find out that car will be running bad, loosing power, etc.... There are many software version and some are incompatible... Always use original file to immo off.
Totally agree with you,best way is to use immo emulator.

[tas_daz]

every car have not same spects.before 2000 have one lamda sensor and after have 2.other car have not the same fuse box relay for ac so if you put other flash not work ac.

[cubica1]

I agree, the properly way is to do immo off on the ORIGINAL file!!! Sometimes, only emmu.
rgds,
cuby

[BigJ]

Correct guys. Done many Sirus 32 ecu's. If you use an "off the shelf" immo off file, you will occasionally have a problem or two. But run the original 29f200 dump through IUD 3.2 and works 100% every time. Also remember to cut pin 58.