PDA

View Full Version : Code for RNS300



t77
3rd February, 2016, 12:21 PM
Hello friends I need pin for RNS300 1K0 035 191 D from 29lv640
THX

exe123
3rd February, 2016, 12:28 PM
Your code is 0285

sikib
3rd March, 2016, 09:56 PM
HELLO SOMEONE COULD HELP ME TO THE CODE OF RNS 300 1K0 035 191 D
THANKS A LOT FOR YOUR HELP

kappa1
3rd March, 2016, 10:24 PM
HELLO SOMEONE COULD HELP ME TO THE CODE OF RNS 300 1K0 035 191 D
THANKS A LOT FOR YOUR HELP


0549......

sikib
4th March, 2016, 04:20 PM
code ok thanx:top:KAPPA1

autoelettronica
16th May, 2016, 08:23 AM
Hello all
someone could help me to get the pin code for this unit:
Volkswagen RNS300 1K0 035 191 C
375686
Thank you a lot for your help

ficho
16th May, 2016, 08:29 AM
HI,
Try 0175.
regards ficho

autoelettronica
18th May, 2016, 08:54 AM
HI,
Try 0175.
regards ficho

Perfect !!
Thank you

gerii
13th September, 2019, 04:33 PM
Hi friends, can you somebody help me with 1K0035191E, AM29LV640ML, thank you very much!

smoggy
13th September, 2019, 05:42 PM
Hi friends, can you somebody help me with 1K0035191E, AM29LV640ML, thank you very much!
try code 1573

gerii
16th September, 2019, 09:17 AM
thank you friend, the code is correct :)

mecsicaneca
18th September, 2019, 09:30 PM
Hi I have a problem with the RNS300 code
I use J-link programmer but there is no STA-2052 processor in its menu :(
and I don't know if I read it correctly

irfa
19th September, 2019, 06:32 AM
Hi I have a problem with the RNS300 code
I use J-link programmer but there is no STA-2052 processor in its menu :(
and I don't know if I read it correctly
bad dump ....

mecsicaneca
19th September, 2019, 10:33 AM
Can't read memory :(
After I connect J-link programmer to the PRNS300.
After 3 seconds the CD turns off and the connection to the programmer is lost :(
The programmer is a J-link V9 I connect it on this circuit, where am I wrong?


Thanks.