PDA

View Full Version : med 17.5.5.21 read



jancat
8th February, 2016, 03:28 PM
Hello,

we want to read 1.2 tsi and 1.4 tsi engine at vw group. I have kess and k tag clone and we couldnt read med 17.5.5.21 . Can you give advise about this problem ? I heard some products can read these engines from obd port. What can we do about it ?

Johnner
8th February, 2016, 05:05 PM
Hi Jancat,welcome to Kaos...I can give you this advice...Could you please introduce yourself to everyone here first ? : Introduce Yourself (http://www.digital-kaos.co.uk/forums/forumdisplay.php/2-Introduce-Yourself)

jancat
8th February, 2016, 10:00 PM
Hi Jancat,welcome to Kaos...I can give you this advice...Could you please introduce yourself to everyone here first ? : Introduce Yourself (http://www.digital-kaos.co.uk/forums/forumdisplay.php/2-Introduce-Yourself)

Sure, my apologise. I didnt see.

Overtune
8th February, 2016, 11:11 PM
1.2 tsi is simos10.x and can be done with FGTECH v54 or KESS v2 or new Genius K TOUCH
New 1.4 tsi are med17.5.21 and cannot be done with cloned tools yet

jancat
9th February, 2016, 01:15 AM
1.2 tsi is simos10.x and can be done with FGTECH v54 or KESS v2 or new Genius K TOUCH
New 1.4 tsi are med17.5.21 and cannot be done with cloned tools yet

what is your best advise for new 1.2, 1.4 tsi and bmw f10, f30 1.6 170 hp model. Compare prices too. I see a topic about new genius k touch. Can it read these cars ?

ddillenger84
9th February, 2016, 04:01 AM
Best advice is either buy a real tool so you have manufacturers support. Otherwise, be prepared for a lot of damaged ecus.

jancat
9th February, 2016, 09:50 AM
Best advice is either buy a real tool so you have manufacturers support. Otherwise, be prepared for a lot of damaged ecus.

But which one ? Im talking about price\performance

ddillenger84
9th February, 2016, 12:28 PM
I have CMD, it seems to work for the most part, but it's virtual read. As a result, you'll run into times they don't have the file on the site, then you're screwed. I use MPPS for tricore boot, and it works well (but like I said, you have to open the ecu). IO terminal is great for Denso.

If you're doing this often, you'll soon find that there is no one tool, but rather a bunch that when combined do most everything.

jancat
9th February, 2016, 12:30 PM
I have CMD, it seems to work for the most part, but it's virtual read. As a result, you'll run into times they don't have the file on the site, then you're screwed. I use MPPS for tricore boot, and it works well (but like I said, you have to open the ecu). IO terminal is great for Denso.

If you're doing this often, you'll soon find that there is no one tool, but rather a bunch that when combined do most everything.

we are working on vag,psa,bmw,mercedes, not at japan models. So you are saying cmd is best option for me ?

CustomCars
9th February, 2016, 12:38 PM
Cheper one to read this ecu you can buy KTAG.
Lower than 1700Eur

jancat
9th February, 2016, 01:49 PM
Cheper one to read this ecu you can buy KTAG.
Lower than 1700Eur

can ktag do all products at ksuite list without kess ?

J_amb_o
9th February, 2016, 04:04 PM
no it cannot

mazila
14th February, 2016, 01:22 PM
KTAG V7.003 Clone http://www.aliexpress.com/item/V2-13-FW-V7-003-KTM100-KTAG-K-TAG-ECU-Programming-Tool-Master-Version-with-No/32574682031.html?spm=2114.30010308.3.1.i8lKbn&ws_ab_test=searchweb201556_6,searchweb201644_2_505 _506_503_504_502_10001_10002_10016_10017_10010_100 05_10011_10006_10012_10003_10004_10009_10008,searc hweb201560_3,searchweb1451318400_-1,searchweb1451318411_6448&btsid=b5674693-729d-4801-8e46-021db3fed3c8 But I'm not sure..

gopelhu
20th December, 2016, 01:27 PM
Hello,

we want to read 1.2 tsi and 1.4 tsi engine at vw group. I have kess and k tag clone and we couldnt read med 17.5.5.21 . Can you give advise about this problem ? I heard some products can read these engines from obd port. What can we do about it ?

Hi you will R/W with original K-TAG only... pls understand.....thank you

semir1978
14th January, 2019, 08:00 PM
clone ktag can do this ecu 100%