clear air bag honda civic 2008 air bag ecu 77960-SNA-A219-M1 95640

[eliaselias]

Hello i hava
honda civic 2008 air bag ecu 77960-SNA-A219-M1 95640
i have desolder the ic and read it with car prog... i have read it many time.. but i think the file is corrupted ..
can you tell me if the file is correct.... and please if you can send me the original file for clear crash thanks you
and last question .. is it safe to read 95640 eeprom inside circuit board or i have to desolder it ?357083

[karalada]

File is corrupted

[eliaselias]

do you have original file

[Jashmine1983]

Here is a cleared file....
357117

[eliaselias]

thanks for the file ... do you think i will work with my honda ecu airbag 77960-SNA-A219-M1 95640
i mean the same number

[andrushka]

You can take file from other module if your file is corrupted, but you will have to calibrate the seat.

Sent from my SM-G900V using Tapatalk

[eliaselias]

what do you mean in calibration the seat?

[magnacin]

Honda have occupant classification module to deploy passenger airbag. When you exchange programing algorithms in SRS ecu you need to re adjust the OPDS settings in the module. Any decent scanning tool can do the job. I use Launch.

[eliaselias]

if i clear the fault using any scan tools will this work ?
or i need to do some adaptation

[magnacin]

You don't need adaptation. The scan tool will do it. As long as it has the function to do it. There are some scanners even from launch that have the capability to read and erase SRS DTC but are limited in other functios as to reset or reprogram OPDS.

[eliaselias]

thanks for your help

[eliaselias]

jashmine you file did not worked//

i have use this file
363311