PDA

View Full Version : Santa Fe 2.2crdi 2009 edc16c39 DPF



imcumen
11th February, 2016, 02:29 AM
Hi

please help to remove dpf + dtc DTC P0546 P0573 P0545 P2002
from this car Santa Fe 2.2crdi 2009 edc16c39
thank in advance

mihaiservice
11th February, 2016, 09:03 AM
You have to reset dpf ash value before write any dpf off file ! If dtc P2002 still are stored will get a lot of white smoke !

imcumen
11th February, 2016, 11:56 AM
Hi mike
please Can you help me ?

Than

baltazar3
11th February, 2016, 11:59 AM
Hi

please help to remove dpf + dtc DTC P0546 P0573 P0545 P2002
from this car Santa Fe 2.2crdi 2009 edc16c39
thank in advance
Is this with automatic gearbox ?

imcumen
11th February, 2016, 01:18 PM
yes automatic gearbox

baltazar3
11th February, 2016, 05:25 PM
Hi

please help to remove dpf + dtc DTC P0546 P0573 P0545 P2002
from this car Santa Fe 2.2crdi 2009 edc16c39
thank in advance
Here is...tested....pm

CustomCars
11th February, 2016, 06:20 PM
For fully working solution only BDM read in this car.
Otherwise can make soon some problem, but that's depend of gearbox type :-)

baltazar3
11th February, 2016, 07:04 PM
For fully working solution only BDM read in this car.
Otherwise can make soon some problem, but that's depend of gearbox type :-)
Yes that is true..P1586 (AT/MT encoding) and glow lights...but i was managed last few cars to work with OBD read.
1. reset eeprom BEFORE writing.
2. kill DTC (P1586) in soft
So far works well

imcumen
14th February, 2016, 12:04 PM
Here is...tested....pm

Hi
thank you baltazar3 (http://www.digital-kaos.co.uk/forums/member.php/150380-baltazar3)
but files are not OK
I did a test with the car after 20 km
the default is reappeared limp mode + dtc DTC P0546 P0545 P2002

imcumen
14th February, 2016, 01:31 PM
Any help please ?

Thanks

ecutuners
14th February, 2016, 02:05 PM
your file dpf off, you need to make checksum

imcumen
14th February, 2016, 02:20 PM
Thank Danny

I will try and report

baltazar3
15th February, 2016, 10:21 AM
Hi
thank you baltazar3 (http://www.digital-kaos.co.uk/forums/member.php/150380-baltazar3)
but files are not OK
I did a test with the car after 20 km
the default is reappeared limp mode + dtc DTC P0546 P0545 P2002


Obviously Swiftec solution dont work...

macako6
15th February, 2016, 01:42 PM
I had the same problem, only in my limp mode entered after spending 50 km . and the only solution was for me is BDM .

imcumen
18th February, 2016, 03:39 PM
your file dpf off, you need to make checksum

thank you danny, your file works well

Regards

ecutuners
18th February, 2016, 03:40 PM
Glad i could help mate

nusa1979
27th February, 2018, 10:08 PM
Hi imcumen... I have same problem. Pls help me with your solution. Thanks

nusa1979
28th February, 2018, 07:12 AM
Hi

please help to remove dpf + dtc DTC P0546 P0573 P0545 P2002
from this car Santa Fe 2.2crdi 2009 edc16c39
thank in advance


I had the same problem, only in my limp mode entered after spending 50 km . and the only solution was for me is BDM .

Hi friend.. I have same problem with Santa fe DPF off.. pls help me with your solutions. Thanks

macako6
28th February, 2018, 02:33 PM
Hi friend.. I have same problem with Santa fe DPF off.. pls help me with your solutions. Thanks

The only solution is to read BDM