PDA

View Full Version : ECU Change in VW GOL 2004 (Brazil) Gasoline


davidobd2
11th February, 2016, 03:56 PM
Hello all. I need to change the ECU in this car, I have the new ECU, but I need to know what I need, and what procedures I need to do for match this new ECU with the car. Both ECUs (Old and New) are equal. Ref: 030906034T.
I have VAS5054, VAG DASH K + CAN v4.22, VAG KKL Cable, SBB, UPA and others. Please I need to know how to do this work. I hope help.

Thanks in advanced.
teeone
11th February, 2016, 10:40 PM
you need just swap serial eeprom
masciaro
13th February, 2016, 12:29 AM
only you need change eeprom from ecus. immo data is in this eeprom, no need any sof or interface. only smd rework station
araby80
14th February, 2016, 10:13 AM
hello
what is marelli part no. is iaw4bv or iaw 4sv?


Hello all. I need to change the ECU in this car, I have the new ECU, but I need to know what I need, and what procedures I need to do for match this new ECU with the car. Both ECUs (Old and New) are equal. Ref: 030906034T.
I have VAS5054, VAG DASH K + CAN v4.22, VAG KKL Cable, SBB, UPA and others. Please I need to know how to do this work. I hope help.

Thanks in advanced.
tinchocbr
15th February, 2016, 12:23 PM
hello
what is marelli part no. is iaw4bv or iaw 4sv?

In google this number (030906034T) its IAW4BV.FR
araby80
15th February, 2016, 12:46 PM
It,s dose not have eeprom the immo in st10f280 flash
I can send you immo off for this ecu i do it b4

Sent from my SM-T111 using Tapatalk
masciaro
15th February, 2016, 01:35 PM
read micro and post files
davidobd2
15th February, 2016, 08:47 PM
Hello all. Now I explain. IMMO ID: 377 953 257 A
I tried to extract PIN CODE with SBB and do not work, I already extract PIN CODE from VW Passat, SEAT CORDOBA, and others, and always fine. Now I can not extract for this VW GOL, I think ECU is very damaged, even when I do diagnostics in real time parameters the engine is OFF. I can use the new ECU and do not touch the old. I can read with UPA Programmer. I need two things:
1-Change the VIN (I need a tool for do that.)
2-Extract PIN CODE (I need to know if somebody have extract PIN to this car with SBB)

I hope your help friends.

Thanks in advanced.
soft4ecu
11th March, 2016, 03:36 PM
It,s dose not have eeprom the immo in st10f280 flash
I can send you immo off for this ecu i do it b4

Sent from my SM-T111 using Tapatalk

Hello, i have same ecu to make off , IAW 4BV.BT ST 10F280 inside, do you have tested off for this ecu ? Please see PM