View Full Version : Kess v2 cables and adapters pinouts
masciaro
11th February, 2016, 06:58 PM
Hi mates, i start this thread to share kess and ktag cables and adapters pinouts.
357333
Maybe together we can get all the pinout cables motorcycles, tractors, boats, DSG and Adapters ktag.
i will star with this, DSG DQ200 and DSG DQ250
DQ200
357332
DQ250
357334
357336
BMW Bike Cable (thanks to pinotec)
357893
carmageddon
11th February, 2016, 07:38 PM
this is better
http://s12.postimg.org/gmh9u6ku1/image001.jpg (http://postimg.org/image/gmh9u6ku1/)
CustomCars
11th February, 2016, 07:47 PM
this is better
http://s12.postimg.org/gmh9u6ku1/image001.jpg (http://postimg.org/image/gmh9u6ku1/)
haha, i don't know they before.
Good solution
masciaro
12th February, 2016, 01:08 PM
this is better
http://s12.postimg.org/gmh9u6ku1/image001.jpg (http://postimg.org/image/gmh9u6ku1/)
maybe its better, but its expensive and if you want to pay dearly for something you can do yourself for little money, i have nothing more to say :burnout:
CustomCars
12th February, 2016, 04:29 PM
That's right but home made don't be have quality like thats.
So for look and quality, must pay to be more pro :chuncky:
masciaro
12th February, 2016, 08:11 PM
it may be that you're right, but I do not think there difference in quality in a single cable
cawadany
12th February, 2016, 09:57 PM
I made a dq250 - obd female cable with switch on/off power. Not beautiful to see, but it's functionally.
masciaro
13th February, 2016, 12:12 AM
if you need expensives tools to work, you arent pro, your tools are pro:driver:
CustomCars
13th February, 2016, 12:39 AM
being PRO in actual time should able giving you possibility buy good stuff and don't lose really priceless time haha
Sure, all here understand what we talking about. Sure hand made is good, like i say only looks worst, and some time needed more time to setup.
masciaro
15th February, 2016, 01:42 AM
thanks to pinotec for bmw moto pinout
leshay
13th February, 2017, 06:30 PM
Hi, for some you might find this useful. i needed to flash my dq250 with kessv2 and didnt have a cable so i decided to make one. it worked perfectly and still does so i decided to share the diagram i made. i got the connector from my local junk yard.
if you find this helpful drop me a thank you.
destroi35
8th September, 2018, 09:45 PM
can one has the kess v2 original cable pinout.? i need to make 2adaptors from obd cable to Man TGS obd diagnose plug to R/W the ecu and the same thing to a volvo fh12 ... can any one of you help me?
stiw
6th August, 2019, 09:00 PM
hello and please help verify my Kabbalah is it correct because my kess v2 5.017 is not communicating with cars
obd2 ---- bd25
1 ---- na
2 ---- 22
3 ---- na
4 ----24
5 ----25
6 ---- 18
7 ---- 8 i 10
8 ---- na
9 ---- na
10 ----21
11 ----na
12 ---- na
13 ---- 17
14 ---- 5
15 ---- 23
16 ----12
needle 11
641546
no__name
2nd May, 2020, 05:23 PM
Hi i try find pinout 144300T 104 , i try connect jtag mpc55xx .
Regards Michal.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.