Galletto v54 master - Fiat AIW59FHW303 Immo

[yanivh]

Hi,

my car is fiat punto mk2 , 1.2 v8 iaf59.m3
i wanto to immo off the ecu by galleto.
I new in the buisness of ecu immo off or vergion.

I have galletto 4 and picture of the ecu pins.

I don't know which wires goes to which ping in order to boot
the ecu.

357768


Anybody knows how to do it ?357766357767

[velindro]

if you want immo off on marelli, you need to read it full in bdm mode

[yanivh]

can you please send me more information on this ?
i need more in detail as i new in that .
i don't even know where each wire should go.

thanks

[Johnner]

Yanvih,could you please introduce yourself here : Introduce Yourself (http://www.digital-kaos.co.uk/forums/forumdisplay.php/2-Introduce-Yourself)

And welcome to Kaos...

[yanivh]

if you want immo off on marelli, you need to read it full in bdm mode
I dont know how to boot the device using pin 114.
I ground it and still cant read it .

Im misssing something ?

Sent from my SM-G850F using Tapatalk

[pike]

if you want immo off on marelli, you need to read it full in bdm mode

deleted.....

[yanivh]

another question,
if i change the ecu to another version (virgion ,or reset one) it gonna work ?
let say from m2 version to m3 etc.

[yellowstilo]

No, M3 instead of M2 won't work because the M3 will need the second lambda probe and the camshaft sensor which the M2 does not use (not present on a car with M2 ecu)
You might use a M2 instead of an M3 but it will run rather poor because it does not use the second lamba probe and camshaft sensor which is present on the car with a M3 ecu.

[yanivh]

thanks
i has engine ecu which was danaged and its model label was missing.

I ordered m3 and the would start in the way it was cranking and no spark at the spak plug,
also at the coil.

theset the crankshaft sensor and seems ok.

so,
that seems to be the issue ?
the ecu is missing camshaft sensor and he don't fire ?

[yellowstilo]

When your car does not have the second lambda probe and the camshaft sensor you will need a 59F M2 ecu instead of the M3 - i never tested if a M3 would start the car but i can imagine the missing sensors might prevent starting.