PDA

View Full Version : Toyota avensis DENSO 09661-05a52 dpf off



dalisman
15th February, 2016, 01:39 PM
Hello all

Can someone tell me what i need to use to read toyota denso ecu for switch off dpf?
or how i can emulate differential preassure sensor ? I know some of them are use resistor but i dont know what resistance need to be ?

CustomCars
15th February, 2016, 02:33 PM
You can buy ready kit for emulate, but that's crap.
Read it by good tool and change in SW, best way - no high consumption issue.

Only orginal tools like X17, Ktag (check list), CMD

Andrei2015
15th February, 2016, 06:43 PM
If engine is 2.2d and have the 5th injector, you can take off plug from it and put resistor, then will have no more smoke(regens) but will not turn check engine light off. If engine is 2.0d will need to do it in sw or by emulator.

LaraVAG
16th February, 2016, 02:40 PM
send file I will disable it.

dalisman
16th February, 2016, 07:11 PM
If engine is 2.2d and have the 5th injector, you can take off plug from it and put resistor, then will have no more smoke(regens) but will not turn check engine light off. If engine is 2.0d will need to do it in sw or by emulator.

Unlucky is 2.0 and have 4 injectors .

dalisman
16th February, 2016, 07:12 PM
send file I will disable it.
The problem is i cant read , if i can read i can change by my self :)

overs0ull
16th February, 2016, 10:17 PM
I use x1u and work fine with it .
If you have someone ho can read send it will make it.
Other way is emulator.
P.s ktag still not supported all denso have lot of no id.