View Full Version : Ford transit connect need pair immo
alclot
17th February, 2016, 07:26 PM
Hi everyone!!
I have a transit connect 2006 and I need resinhronise the ECU and IMMO.
ECU 7T11 - 12A650 - AD SID206
eeprom 95320
and immo dash 7T1T-10849-CA
with 9c12h256 processor
Please help to pair this dump or give the good pair
Thanks in advance ;)
rokibar
18th February, 2016, 08:27 AM
here your ecu synhro and one complet
358603
alclot
18th February, 2016, 09:08 AM
Hi rokibar. The complet files are for the same ecu reference?
Thanks a lot for your help man!! ;)
rokibar
18th February, 2016, 09:25 AM
if you have not the other problems try first with your ecu synhro file. if all other ok will work for sure.
jupulino
11th February, 2019, 07:22 PM
Hi!
I need immo syncro on Transit Connect, please!
Ecu Sid 206 7T11-12A650-HH eeprom 95320
Dash Visteon 8T1T-10849-CC 9S12H256
Thanks in advance!
kiszka
11th February, 2019, 07:40 PM
Hi!
I need immo syncro on Transit Connect, please!
Ecu Sid 206 7T11-12A650-HH eeprom 95320
Dash Visteon 8T1T-10849-CC 9S12H256
Thanks in advance!
synchro is ok
press buttons
leotdx
11th February, 2019, 07:50 PM
It is simple solution. Use focom . fordvcm mini, ford vcm2 etc. and pair with incode-outcode.
Stelaras26
7th January, 2020, 12:18 PM
Hey!
Iy happened that i have a same problem!
Anyone willing to check/help?
kiszka
7th January, 2020, 06:35 PM
Hey!
Iy happened that i have a same problem!
Anyone willing to check/help?
your mailbox is full
alex_r_2001
11th January, 2020, 08:42 AM
Anybody that owns a passthru programmer or elm can use forscan it's free and works perfect never had to put any incode or outcode does it automatically.. well at least the 20 times I have used it...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.