MAZDA 3 2004 1.6 HDI PSA ECU + DASH FAILURE

[alclot]

HELLO CAR IS MAZDA 3 2004 1.6 HDI PSA ENGINE

+ NOT STARTING
+ INMO LIGHT ON.
+ KEYS ARE OK
+ SEEMS COMM PROBLEM BETWEEN ECU AND DASHBOARD.

ENGINE ECU PCM

0281 011 534 4M61 - 12A650 - AC
95160 INSIDE

DIAG Shows errors: p1602, u0073

DASHBOARD

4T BN9J A 93C56 inside

DIAG shows errors: u2516, u2510


Have checked all wiring between, and all are ok.

I upload dumps, I am thinking, perhaps someone can check my dumps....or even repair it.

Any other suggest will be great, I have even disconnected almost all ecus....radio, a/c and so on....so CAN line is not disturbed, but no luck.

THanks for help in advance ;)

[ypiter]

Dash bad dump

[alclot]

Hi ypiter. Is it possible to repair the file? Thanks for responding ;)

[ypiter]

Hi! Need write new chip in dash dump. Then write dumps in blocks.
Pass pm

[mahmoud bourgi]

I need immo off mazda3 2004. Help please

[lion0304]

I need immo off mazda3 2004. Help please

Ford Mazda no way for immo off

[xtech]

Write keys with IDS

[alclot]

Hi! Need write new chip in dash dump. Then write dumps in blocks.
Pass pm

Hi. Car no start. Give me this DTCs:
PCM:
P1622 IMMOBILIZER ID MISMATCH
P1632 SMART ALTERNATOR CIRCUIT OUTPUT
P0704 MALFUNCTION CIRCUIT BREAKER INPUT CLUTCH
P0341 RANGE OPERATION A camshaft position
P0562 SYSTEM UNDER STRESS
P138B VOLTAGE GLOW PLUG CONTROL MODULE
P0404 RANGE OF MOVEMENT CONTROL PERFORMANCE EXHAUST
P1412 circulation valve EXHAUST FROZEN
U0073 BUS COMMUNICATION FAILURE (CAM)

DASH:
B1342 THE UCE FAULT
U0100 CAN MISS FROM PCM
B2141 CONFIGURATION FAULT NVM


What do you think?
nithtmare this car ;(
thanks in advance ;)

[WISETIGER]

Hi
You must take second hand dash.
Then make module initialisation with avdi (erase ptas and learn 2 key)
Ecu and dash will synchronised automatically.


Envoy? de mon GT-I9515 en utilisant Tapatalk

[alclot]

Hi Wisetiger. Only I can make this avdi procedure with car really?
Thanks in advance ;)

[WISETIGER]

My friend 3 month before i had same issue with lost ecu on mazda 3
i put used ecu and procedure worked:
Last month I made same procedure on ford fiesta and it also worked with bosch edc16 ecu.
Even VIN was different on dash and ECU the car was starting fine.

[krpic]

did you slove problem? i have working set ecu+dash need to make new transponder

[alclot]

did you slove problem? i have working set ecu+dash need to make new transponder
Hi krpic. Please send me. Thanks in advance ;)

[icogsm]

working set dash+ECU
B.R.

[krpic]

here if you did not solve

[jolidj]

hi. can i have pass for beckup please? thanks

[FUSED:]

hi dear ALL
am looking solution for this problem that i hav me too.
kindly can you give me pass to test your full set files

kind regards

here if you did not solve

[FUSED:]

hi my dear
kindly can you give pass for your full set dash+Ecu files
am facing for this issues too

thank you in advance


working set dash+ECU
B.R.

[FUSED:]

Kindly i dont hav a pass.
regards


hi my dear
kindly can you give pass for your full set dash+Ecu files
am facing for this issues too

thank you in advance

[FUSED:]

kindly can you give me pass?
regards


here if you did not solve

[FUSED:]

I don't have pass


Sent from my iPhone using Tapatalk

[ssemmedo]

i need the password as welll

[tihos89]

Možete li mi pomoći oko problema sa paljenjem na Mazdi 3 1.6hdi 2007g.
Vidim da rješvate te probleme pa ako mi možete dati nekaka kontak da e cujemo?

[kiszka]

Možete li mi pomoći oko problema sa paljenjem na Mazdi 3 1.6hdi 2007g.
Vidim da rješvate te probleme pa ako mi možete dati nekaka kontak da e cujemo?

please write in English only