Peugeot boxer 2.8 HDI Immo off

[Zero2rule]

Hello everybody!

My work van has been sitting in my driveway for 3 weeks now, Immobilizer is on and I don't have spare key either.
Desoldered 29F400 from ECU and read the flash. I have tried Universal Immo decoding 3.2 but no luck!

Can somebody please help me get the damn immo off?

Peugeot boxer 2.8 HDI 2002
Bosch 0281010486
D2841HC
EDC15C7

29F400 dump -

359010

[vlaki electric]

here you go,write with programer flash not true obd...
359050
pass in pm

[Zero2rule]

Thanks!
Wrote this on 29F400 but still no luck, removed immo box from steering column too.

Tank pump does not kick in , glowplug and injector light stays on.
I suspect other electrical problems, going to investigate a bit more.

[Zero2rule]

The van is now working with the flashed 29F400, no immo!

Going to leave a small description of the electrical problem if somebody stumbles upon this thread - injector light and glowplug light stays on, tank fuel pump not working
Problem was a corroded(and burned out) wire running underneath the battery stand., it ran from the 4 fuses near the battery - 3 big 1 small fuse. It came from the small fuse (30A) and it powers the fuel pump& injectors.
Patched it and she fired right up!