ruffles1986
21st February, 2016, 11:56 AM
Hi mates, i have a Zafira A from '04 ,the car was crashed and the dash was changed. I not had comunication with any ecu of car, i check all Gnd points, power supply in ecus, and after igniton supply and all was ok. (I check also DLC)
Well i disconnected the engine cooling module, and then i have communication with all modules in pin 12 K-line. (Airbag, Instrument,Central door lock....)
But i continues without having comunication on pin 7. (Ecu, abs, immo)
I think ecu is ok because when i turn key to start the rpm go up in instrument... but i don't know if others modules are working.
Any have a wiring driagram for check this from pin7 of DLC to modules?
Well i disconnected the engine cooling module, and then i have communication with all modules in pin 12 K-line. (Airbag, Instrument,Central door lock....)
But i continues without having comunication on pin 7. (Ecu, abs, immo)
I think ecu is ok because when i turn key to start the rpm go up in instrument... but i don't know if others modules are working.
Any have a wiring driagram for check this from pin7 of DLC to modules?