View Full Version : Bmw cas4
diagtech
22nd February, 2016, 10:17 PM
Has anyone got a cas4 they can sell me it needs to be the one with 3 plugs and a 1l15y micro thanks
diagtech
23rd February, 2016, 10:44 PM
Does anybody know if this cas is the one with 1l15y or 5m48h micro in thanks 9318365 5WK50720NBR D419
lupu_sandu
23rd February, 2016, 11:13 PM
Look here: http://www.ebay.ie/sch/i.html?_odkw=bmw+f10+module&isRefine=false&_osacat=0&_from=R40&_trksid=m570.l1313&_nkw=5WK50720NBR+&_sacat=0
diagtech
23rd February, 2016, 11:25 PM
I know that is the cas i want to know if it has a 1l15y in so i can clone it from another cas thanks
dataprog
24th February, 2016, 06:26 PM
yes
I have a user Do you want one
Yes, I hold a clone of another
diagtech
26th February, 2016, 08:36 PM
Yes i need to buy a used one that has 1l15y in it thanks
DucRider
26th February, 2016, 10:53 PM
what happened to yours? cas module
fi you need data for this mask 1l15y ,I can help you
diagtech
26th February, 2016, 11:23 PM
Hi i have the data thanks took a can blocker off it and did it with smok and bridged filter points now wont work
DucRider
27th February, 2016, 12:14 AM
did you figure out what type mcu is there?
markony79
27th February, 2016, 12:50 AM
3 plugs in cas is for comfort module, this can have with mcu 1L15Y and also with 5M48h , and 1N35H
diagtech
27th February, 2016, 01:00 AM
It has 1l15y micro from 2009/2010 thanks
DucRider
27th February, 2016, 01:17 AM
did you try ,if you have communication with the cas module?
diagtech
27th February, 2016, 01:23 AM
Tried with cas tester with cas out of car and cas is faulty
markony79
27th February, 2016, 01:39 AM
post eeprom and flash from this cas
dont use smok for cas4
diagtech
27th February, 2016, 02:02 AM
To be Honest i have never had a problem with smok for cas 4 1l15y i have attached original flash and eeprom and eeprom with slight change and flash from bmw cas 4 with same number thanks
markony79
27th February, 2016, 02:24 PM
write this flash
Tachodiag
27th February, 2016, 03:52 PM
Markony, what else to use for CAS4 instead Smok ?
diagtech
27th February, 2016, 06:09 PM
Thanks for that will give it a try and let you know
markony79
29th February, 2016, 12:35 AM
I use original uupa for reading, very fast and no problem. For writing i use xprog original, but first i remove sec bytes. Procedure take about 1 hour, but never get problem. I have also xep100 from automotive art, but sometimes corupt the d-flash.
Conections and cables i make my self for uupa and xprog
Skickat fr?n min E2303 via Tapatalk
markony79
29th February, 2016, 12:39 AM
Xprog, i use only on com-port
Skickat fr?n min E2303 via Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.