View Full Version : iveco egr edc16c39
carbrain
23rd February, 2016, 04:30 PM
hello all
and iam happy to be part of this forum
iam working on iveco edc16c39 and want to remove the egr from it
pls if u can help me remove it totally
thanks
file attached
359694
CustomCars
23rd February, 2016, 04:38 PM
Welcome, wich DTC you have on it, in P format ?
carbrain
23rd February, 2016, 05:06 PM
i read it on autocom
the fault was
188 egr regulation (negative deviation)
below maximum threshold
ashraf2000
23rd February, 2016, 08:54 PM
i have the same problem if u can help in removing the egr
draganelektricar
24th February, 2016, 12:13 AM
EGR Actuator plug disconnected..
pass-pm
carbrain
25th February, 2016, 06:31 PM
hello
i have tested your file but i still got the same error. before i test your file i disconnect the egr plug and it gave me another fault which is egr valve open circuit. then i programmed your file and this fault was gone and the original fault comes again. which is 188 or in p format it is p0401 egr insuffecient flow althogh the plug was disconnected
pls if you can help me
thanks
centrohifi
25th February, 2016, 06:44 PM
no disconnect plug ..and try
read ecu in OBD generic
carbrain
25th February, 2016, 07:37 PM
if not disconnect plug it gives me the fault p0401 insuffecient flow
carbrain
25th February, 2016, 08:06 PM
pls can any one remove the fault p0401
ljubomir
25th February, 2016, 08:59 PM
try this
egr+ dtc clear
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.