View Full Version : UPA USB 1.2 no Vcc voltage.
meteor80
23rd February, 2016, 08:43 PM
Hello.
Does someone have any solution how to repair UPA USB 1.2 where is no Vcc.
No voltage on 9 pin error.
Red PCB.
I have resoldered all PCB but no result.
All ICs are sanded.
Kind regards.
Seby_TM
23rd February, 2016, 10:02 PM
Check you Fuse on main PCB is like some clasical transistor sot 92 with only 2 pins check if is in short circuit, if it is in short circuit is ok if not is not ok !
After you can check the DC-DC step up converter MC34063 if is ok !
meteor80
24th February, 2016, 09:32 PM
Hi.
Soldered legs together and no result.
Any other solution?
Seby_TM
24th February, 2016, 10:44 PM
To check IC of DC-DC step up converter MC34063 if is ok and the transistor !
And you can try to replace also 74HC125D and MCP3008 analog digital converter, but can be also some problem of eeprom 24C from usb module !
You UPA is original or is China clone ?
Try to make FIRST also self test of programmer to see where you have errors also !
Seby_TM
17th March, 2016, 04:13 PM
Hi.
Soldered legs together and no result.
Any other solution?
Did you find the problem ?
rokibar
17th March, 2016, 04:48 PM
Check you Fuse on main PCB is like some clasical transistor sot 92 with only 2 pins check if is in short circuit, if it is in short circuit is ok if not is not ok !
After you can check the DC-DC step up converter MC34063 if is ok !
thank you very much. after short fuse my upa working againe.
http://www.digital-kaos.co.uk/forums/showthread.php/517163-upa-problem
Seby_TM
23rd March, 2016, 09:46 PM
Nice to know this :)
Don't forget to push "Thanks" button from left !
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.