vw golf mk5 cluster help

[scatman75]

hi i just got carprog clone to write a eeprom bin file and it now does not show a immo on the cluster ,good i thought the immo must be of but not so,installed in into my car and the car still refuses to start and ive now got an error were the odometer would be.
please help an amateur learning..
cluster is 1k0920874 and i flashed it with a 1k0920974b bin file i found online..
thank you..http://oi65.tinypic.com/2cmnpyo.jpg

[teeone]

wat were you trying to do

[scatman75]

wat were you trying to do
trying to remove the immo ,any ideas please..

[simon77]

immo is removed in the engine ecu not cluster. put original file back in cluster.
regards

[morfej]

simon77 he probabbly did not mean the immo to start the car, but remove the message about immo problem when transponder don't work... and that is possible. But at least he could attach the original dump.

[scatman75]

simon77 he probabbly did not mean the immo to start the car, but remove the message about immo problem when transponder don't work... and that is possible. But at least he could attach the original dump.
hi and thanks for replying,i got a mpps v13 cable deliverd the other day so will go read the ecu,my car is a 2006 model golf gti,
the cluster was messed when i got it so i found a eeprom file on here that matched my cluster ,it at least got it operating again screen working etc except for the error in the odometer.
so do i leave the cluster the way it is and upload my ecu file and someone here can turn immo off,is that correct..
thank you..

[scatman75]

i did a bit more homework and it seems to immo off the ecu i need to also immo of the flash on it also,as i do not have the bdm100 tool can i go through the cluster its self..
the cluster when got had immo safe on the screen ,i wrote a new immo off file over it with carprog and the a6 clip and now immo is of but have and error in the odometer.
what else do i need to do to get these clocks working ..
please help..

[scatman75]

Can anyone help..

[teeone]

send ecu details but i guess ecu must be ME9.5, with 95080 eeprom if thats so upload eeprom dump will help

[kiszka]

..............

[LauAlf]

Post eprom ecu.

Enviado do meu HUAWEI G750-U10 atrav?s de Tapatalk

[LauAlf]

1k0920874 is golf 5 8000rpm 220km/h, and photo you cluster is golf 5 gti, you swap scales?

Enviado do meu HUAWEI G750-U10 atrav?s de Tapatalk