PDA

View Full Version : Nissan Murano 2003, need pin cone



rtr989
27th February, 2016, 02:04 PM
Hello!
Here is nissan murano immo photo, i need to calculate the pin for this immo, 6100 does not fit.
360573

rokibar
27th February, 2016, 02:47 PM
nats 6 can't be calculated from label.

Bllinda
27th February, 2016, 03:06 PM
read t.m.s
Hello!
Here is nissan murano immo photo, i need to calculate the pin for this immo, 6100 does not fit.
360573

rtr989
27th February, 2016, 09:41 PM
read t.m.s
sorry, don`t understand, what does it mean?

rtr989
27th February, 2016, 09:50 PM
nats 6 can't be calculated from label.
do i need put keys in bcm?

rtr989
28th February, 2016, 11:01 PM
Please help, how to get pin?

kamikazedr
29th February, 2016, 06:22 AM
RTR989 he is telling you that read the mcu inside of the immo box and upload the file here so we can help you an by the way did you try 5523?

rtr989
29th February, 2016, 07:59 AM
RTR989 he is telling you that read the mcu inside of the immo box and upload the file here so we can help you an by the way did you try 5523?
yes, i try 5523, it`s not work.
i need to read mcu inside immo or inside bcm? in immo no any tms mcu, it`s only one pcf, i think i can`t read this pcf.

techmax
29th February, 2016, 08:25 AM
yes read that pcf

rtr989
1st March, 2016, 09:41 AM
here is lr56 dump from bcm:
361050

361051

is it possible to extract pin from this dump?

sbtriny
1st March, 2016, 11:04 AM
hi, m8.
your pincode is 2238
good luck, m8

rtr989
2nd March, 2016, 03:00 PM
hi, m8.
your pincode is 2238
good luck, m8
Thank You! it`s work!

sbtriny
3rd March, 2016, 01:03 AM
Thank You! it`s work!

hi, m8
next time, if you work nissan or infiniti, you tell me bcm no.
i'll give nats 5 pincode
have a nice day



Sent from my iPhone using Tapatalk

rtr989
10th March, 2016, 09:08 PM
what type of transponder i must use with this nats6?

lion0304
10th March, 2016, 10:34 PM
what type of transponder i must use with this nats6?

4D60 or ID46

rtr989
11th March, 2016, 07:11 AM
4D60 or ID46

i try all of it, don't work, ring around key is work, pin code is work, after programing i can only thre times start the engine...

sbtriny
11th March, 2016, 07:50 AM
i try all of it, don't work, ring around key is work, pin code is work, after programing i can only thre times start the engine...

it's nats5, mate.
you can program key with id 46.
look at that alarm lamp goes off during promgramming.
if it's flashing, fail to program.
and check the dtc on ecu.
some nissan cars has ecu and immo chain issue
good luck


Sent from my iPhone using Tapatalk

rtr989
11th March, 2016, 08:21 AM
it's nats5, mate.
you can program key with id 46.
look at that alarm lamp goes off during promgramming.
if it's flashing, fail to program.
and check the dtc on ecu.
some nissan cars has ecu and immo chain issue
good luck


Sent from my iPhone using Tapatalk
during promgramming lamp goes off, but after programming it goes on and don't off, in ecu no dtc, in nats i have immo-key chain error.

sbtriny
11th March, 2016, 09:47 AM
during promgramming lamp goes off, but after programming it goes on and don't off, in ecu no dtc, in nats i have immo-key chain error.

car has immu-key chain issue?
did you try to start over 3 times with wrong keys?
if you did it, disconnect negative over 30min.
after 30 min, connect battery, ignition on( not start).
alarm lamp goes off, you can start the car,
but lamp flashing, you must reprogram key(recommamd to use virgin id 46 chip)

good luck, friend

rtr989
14th March, 2016, 07:16 AM
May be i doing something wrong?
I put NATS in program new key mode, lamp on dash goes off, turn ign off and get out the key, insert key with new chip, turn ign. on, wait 5 sec. turn off, then i try to start engine, engine start but lamp on panel does not off, and after 3 starts it's in lock mode...