Husqvarna - BMW bike lost keys, please help!

[TudiM3]

Hi,

I have a Husqvarna Nuda FR650 bike with lost keys.
I disassemble the dashboard and i found a eeprom 25L160
I read out the eeprom.
So, can anybody make keys for me, or tell me how can i make keys?
I have key programmers,but i dont know what type of chip needed,and not know how to configure the chip and where is the key in the dump?
I know the lost key's ID numbers, but i don't know that's enough or need something to modify on the dump?

Thank You!

[rob h]

Motorola inside ECU holds Keys. 9s12g128
Tmpro

[TudiM3]

Motorola inside ECU holds Keys. 9s12g128
Tmpro
Thank You!
My dashboard has MCU 9s12xs250 not 9s12g128...
I think the keys are in the external eeprom because there i found the key ID numbers.

[rob h]

I mean inside engine control unit.
Not in cluster.

[TudiM3]

I mean inside engine control unit.
Not in cluster.
Ohh is see...
But the ring antenna wires go into the cluster,and when i read the cluster with my BMW diagnostic tool,it shows EWS4 inside the cluster.
So the immo is integrated in the cluster..
And when i put ignition on the cluster display show EWS fault..
And the cluster's fault memory shows key reading fault.. (of course because i don't have key...)

[rob h]

I mixed some thinks up here.
This is the tmpro module discription:

Software module 186 - BMW C600,C650 Husqvarna Nuda dashboard
Memory device is serial eeprom 25c160 SMD8 package.
Exected file size is 2048 bytes.


Use TMS37145 80-bit transponder,for example Ford 80-bit (http://www.ecuvonix.com/4d60-80bit-ford-p-795.html)
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
BMW:C600,C650
Husqvarna:Nuda

[TudiM3]

I mixed some thinks up here.
This is the tmpro module discription:

Software module 186 - BMW C600,C650 Husqvarna Nuda dashboard
Memory device is serial eeprom 25c160 SMD8 package.
Exected file size is 2048 bytes.


Use TMS37145 80-bit transponder,for example Ford 80-bit (http://www.ecuvonix.com/4d60-80bit-ford-p-795.html)
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
BMW:C600,C650
Husqvarna:Nuda
OK

I disassembled the ecu and there is no motorola inside.. I fonund Infineon SAK-XC2060M processor

So what can we do?
In the first post i posted the 25c160 dump.
Can you help me to make key? :)

[rob h]

You could find some with tmpro, with this licences 186.
You can send them the 25c160 dump,
And they send you dump and tranponder.

I do not have my tmpro anymore, and tango does not support this ews system.
So contact a tmpro dealer, near you. And ask him for a customer that could help you.
Or start a new post: TMPRO Owner search.


The also have a open forum on there site http://tmpro2.com/