PDA

View Full Version : W163 ML 400 CDI EGR off


Fec001
2nd March, 2016, 11:14 AM
Hi!
I heard that, EGR off possible with DAS developer mode. Is that true? ECU is bosch EDC15C6?
bobolin4o
2nd March, 2016, 12:10 PM
It's Temic ...

361319
Fec001
2nd March, 2016, 12:14 PM
TEMIC CRV 1.0? Possible by DAS developer?
bobolin4o
2nd March, 2016, 12:16 PM
Don't know, you can try... nothing to lose.
stanislav georgiev
2nd March, 2016, 02:28 PM
If it's possible, you should try here361355
Fec001
2nd March, 2016, 04:08 PM
If it's possible, you should try here361355


Yes tried that, Not working. In this car that option already set to nein. Must switch off by dump.

Here is the dump read by boot mode. Please switch off EGR completely. DTC: P2024: Y27/9 and Y27/10 EGR actuator.
bobolin4o
2nd March, 2016, 06:49 PM
Try this file... never done before... must to have closed EGR by EGR map and maybe disabled P2024, but if have limp mode, let me know.
baltazar3
2nd March, 2016, 06:55 PM
Yes tried that, Not working. In this car that option already set to nein. Must switch off by dump.

Here is the dump read by boot mode. Please switch off EGR completely. DTC: P2024: Y27/9 and Y27/10 EGR actuator.
This is TEMIC ECU and removing EGR in soft is wasting time .You have to remove EGR from car and properly clean up.This is a hard job to do but is possible.
br
mercis
2nd March, 2016, 06:57 PM
or emulator, easy than on w163 egr remove
Fec001
3rd March, 2016, 09:34 AM
Try this file... never done before... must to have closed EGR by EGR map and maybe disabled P2024, but if have limp mode, let me know.

Not working, still limp mode and DTC P2024 :(
bobolin4o
3rd March, 2016, 10:29 AM
Test again...
P.S. Have you looked for EGR valves DC, and MAF specified value?
digital320
22nd May, 2017, 02:59 AM
how did you read this ecu in boot mode mate ?? I am trying to do with galletto but cant read it....can you please share your pinout?
tricore3
22nd May, 2017, 09:39 AM
that solution work for me
you need to close egr with a blank plate

report
digital320
14th June, 2017, 01:18 PM
mate can you please tel me how did you read this in boot mode? you have an pinout? I tryed galletto but I think pinout is wrong becouse red light is blinking like it is shorted..
maba40
21st May, 2020, 07:05 AM
good morning, please pass me the password, mabarroso@live.com . Thank you
maba40
21st May, 2020, 07:08 AM
can u resend the password? mabarroso@live.com . Thank you
byyoyo
15th June, 2023, 10:57 AM
hello friend can you leave me the password, thanks