Jakey Lynx

[dustin2014]

Does anyone happen to have a manual for Jakey Lynx handy please.?
Thx.

[Cromwe11]

yup what do you want to know

[dustin2014]

Mainly how to calibrate & adjust the spacing. Cheers.

[whiskeyman]

Not much to adjust
dont need a manual
stick a key in and adjust to suit
cant see where you can go wrong

[paul_12345]

Not much to adjust
dont need a manual
stick a key in and adjust to suit
cant see where you can go wrong

does it require brain.pdf

[dustin2014]

does it require brain.pdf

Link please

[P&D]

http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/quote_icon.png Originally Posted by paul_12345 http://www.digital-kaos.co.uk/forums/images/styles/DarkCore/buttons/viewpost-right.png (http://www.digital-kaos.co.uk/forums/showthread.php?p=2718575#post2718575)
does it require brain.pdf




Link please


lol My stomach is still hurting lol ;)

[insomnia2009]

once again unnecessary posts from paul no need to be like that with people dont understand it

[paul_12345]

once again unnecessary posts from paul no need to be like that with people dont understand it

Its called a joke.. lighten up.

If he had a look at doing it and got stuck I'd try and help him like I tried here ;) http://www.digital-kaos.co.uk/forums/showthread.php/390097-Condor-XC007-Who-s-got-one?p=2694903&viewfull=1#post2694903

[dustin2014]

Well I did look at it. and Ive no problem with setting the depth its the spacing Ive a problem with, the cuts are uneven in width.That's why I asked for a manual.
I feel a whole lot better about it now after posting on here.
Won;t be asking for help again on this forum.

[paul_12345]

Well I did look at it. and Ive no problem with setting the depth its the spacing Ive a problem with, the cuts are uneven in width.That's why I asked for a manual.
I feel a whole lot better about it now after posting on here.
Won;t be asking for help again on this forum.

So you want to cut off a outlet for help because you feel a little embarrassed.. fair enough.

But to answer your problem - its not actually a problem the cuts are not meant to be even. The spacing of each cut is 2mm but the cut is meant to be 2.4mm overlapping the cuts next to it slightly. So a deep cut will always be 2.4mm whereas a cut with 2 cuts deeper next to it will be narrow as the 2 deeper cuts will overlap either side.

[dustin2014]

So you want to cut off a outlet for help because you feel a little embarrassed.. fair enough.

But to answer your problem - its not actually a problem the cuts are not meant to be even. The spacing of each cut is 2mm but the cut is meant to be 2.4mm overlapping the cuts next to it slightly. So a deep cut will always be 2.4mm whereas a cut with 2 cuts deeper next to it will be narrow as the 2 deeper cuts will overlap either side.

No, I don't feel embarrassed at all. I just didn't appreciate your 'joke' as I'm recovering from a traumatic brain injury.Thanks for your help though.

[dustin2014]

So you want to cut off a outlet for help because you feel a little embarrassed.. fair enough.

But to answer your problem - its not actually a problem the cuts are not meant to be even. The spacing of each cut is 2mm but the cut is meant to be 2.4mm overlapping the cuts next to it slightly. So a deep cut will always be 2.4mm whereas a cut with 2 cuts deeper next to it will be narrow as the 2 deeper cuts will overlap either side.
Thanks for your help,