Key Program Peugeot 206 Year: 2006

[davidobd2]

Hello everyone. I need to programm a key in Peugeot 206 year 2006. I have a chip PCF7936AS virgin, I read it with ZedBull and the mode is Password-Manchester. I need to know if I need to precode the chip. The other problem is I have SBB v33 and the ranges in Peugeot 206 are
98-01
01-02
02-03
I need to know if exists an alternative way to programm in this car with SBB.

Thanks in advanced.

[rokibar]

some say the transponder does not have to be precoded and it is true that for most of Peugeot and Citroen cars does not have to be but there are a cars which will not be accepted transponder without prior preparation. personally I had such a case. you can try both versions but you will not go wrong if you prepare transponder before programming. in your case choose 02-03 can

[davidobd2]

OK, the problem with the transponder I thionk is in the mode, but mine is in Password-Manchester. My main preocupation is the range in SBB, because 02-03 do not says CAN. A fragment of the list:
206 98-01
206 01-02
206 02-03
207[CAN] 06-

[rokibar]

you can try any years. . if you corect choised will have comunication with ecu and you can continue. transponder should be in Password Mode

[davidobd2]

JOB DONE OK. I programm the chip without precode because it was in Password-Manchester MODE and in SBB I selected range
206 02-03
Remember the car is a 206 year 2006.
I need to know why the ranges, wich are the difference between 206 from 98-01, 01-02 , 02-03. I need documentation about locksmith. Please if somebody can help with that.....

Thanks.


Best Regards.

[rokibar]

98-01 comunication via k line and goes transponder id45
01-06 comunication via k line and goes transponder id46
06- comunicatiopn can and goes transponder id46