View Full Version : Zafira B ecu dpf 1.9 dt
cosmin12345
2nd March, 2016, 06:53 PM
Hello to all , i receive a car wich has no active DPF , EGR , air throttle , and is in limp mode only 2000 RPM .I need to make this car to work , i read file inside and attached. I need file with only DPF off if is possible , because i don't have Soft for prepare dump and checksum .I read with x-prog , standard BDM connection for EDC16 BOSCH .
0 281 012 549 Zafira B 2006 year , 1.9 DT engine
Thank you
mariusica_boy
2nd March, 2016, 07:24 PM
Hello to all , i receive a car wich has no active DPF , EGR , air throttle , and is in limp mode only 2000 RPM .I need to make this car to work , i read file inside and attached. I need file with only DPF off if is possible , because i don't have Soft for prepare dump and checksum .I read with x-prog , standard BDM connection for EDC16 BOSCH .
0 281 012 549 Zafira B 2006 year , 1.9 DT engine
Thank you
I prepared for u 3 file.
1. restaured original files.
2. dpf off checksum corected.
3. dpf+egr off checksum corected
Please report.
Pass in PM.
cosmin12345
3rd March, 2016, 06:26 PM
I prepared for u 3 file.
1. restaured original files.
2. dpf off checksum corected.
3. dpf+egr off checksum corected
Please report.
Pass in PM.
Hello your solution doesn t work i try bouth , same result after 30 sec is going into limp mode.
Anyone else please have correct file ?
Thank you
nikobg
3rd March, 2016, 06:46 PM
post ori file
cosmin12345
3rd March, 2016, 06:51 PM
Hello , ori file wich i read from ecu is in first post .I don't have original file for this ecu (factory file) .I did not modify myself .
If you have an ori file for this type of ecu and can modify , it will be greatfull .
Thank you
nikobg
3rd March, 2016, 06:55 PM
i dont have original file
cosmin12345
3rd March, 2016, 07:14 PM
i dont have original file
Ok , i found one wich is same soft number with mine .Can you modify this one ?
Thank you
Andrei2015
3rd March, 2016, 09:21 PM
What errors do you get. Try to close egr with plate
cosmin12345
3rd March, 2016, 09:38 PM
What errors do you get. Try to close egr with plate
Hello , i don't have any error , this is the problem .Egr is working , throttle air (swirl flap if that is his name) is working , problem is dpf has a hole in it and car is in limp mmode , going up only 2000 rpm .I still wait for a good file .
thank you
Andrei2015
4th March, 2016, 07:53 AM
write original file and do a dtc scan, post dtc's here
bobolin4o
4th March, 2016, 08:50 AM
Ok , i found one wich is same soft number with mine .Can you modify this one ?
Thank you
Don't flash this file, it's different software version!
The only one right way is to make update with GlobalTis SPS function, read the flash after that and make proper DPF off...
If you can't do that, tell the customer to make it in oficial workshop (i mean update).
Regards!
mihaiservice
4th March, 2016, 01:48 PM
Hi
here you that the correct sw,write the file with Xprog and check wich dtc are stored !
chk are updated in file
bobolin4o
4th March, 2016, 02:08 PM
Someone has made a huge work with this car, very impressive...
:bs:
cosmin12345
4th March, 2016, 04:24 PM
Hello , i write your file and those are DTC present :
P0380 - Preheating system - defect
(08) - Prezent
P0425 - Catalyst temperature sensor circuit bank 1 sensor 1
(05) - Prezent
P1902 - Catalyst temperature sensor circuit bank 1 sensor 2
(05) - Prezent
what to do next ?
Thank you
Edit post
bobolin4o
4th March, 2016, 04:37 PM
First at all use english, please...
Second, wait for mr. Mihai to make for you a proper DPF off file... he have a good soul as i know.
Regards!
mihaiservice
4th March, 2016, 05:05 PM
The first thing you have to replace or to repair glow plug module....:ciao:.(blogodaria sosedi )
cosmin12345
4th March, 2016, 05:36 PM
The first thing you have to replace or to repair glow plug module....:ciao:.(blogodaria sosedi )
Hello , sorry for this , i don't think glow plug has something in common with DPF (if not require regeneration) . I give up to this job , it's not the answers that i'm expected.I know the car is BAD , but is to much from all sided for me to try to repair such a car .
Thank you
vasko
4th March, 2016, 05:57 PM
I have full bdm and dpf off for this ecu...tommotow i will post
Sent from my iPhone using Tapatalk
bobolin4o
4th March, 2016, 06:00 PM
Why you want to give up?
There is nothing hard to do. Now you have 2 unplugged temp. sensors at the DPF and faulty Glow module (common problem at all).
So, Good DPF off and new glow module will solve this case.
mihaiservice
4th March, 2016, 06:38 PM
What we can do now ? just to relax...:bike:
rhrally
5th March, 2016, 10:19 AM
Cosmin12345 contact me by PM.
Regards
vasko
6th March, 2016, 08:18 AM
Members I think this is ori for this ecu ....
I also think that another person has tried to program a ecu...
check out the original....
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.