Citroen c3 Picasso autoliv 609973600 9673654980

[colpamax]

Please, help with clear of Airbag module after crash

Citroen C3 Picasso 2010
Module date 26/02/10

Autoliv 609973600 9673654980

All wires are good
Temporary resistors instead of belts' pretentioners are inserted with value of 2.2 Ohm.

I have tried one solution, but scanner still showing - crash data and s-belt errors.
New airbags are installed.

May be my solution is wrong.
Any suggestions are welcome.

[karol34]

2.4 Ohma instal.

[colpamax]

2.4 Ohma instal.

After testing with cleared dump (I don't know if it is correct) - diagnostics shows errors not only for pretentioners.
For example it shows Error of passenger airbag, but that airbag is good and real.
Also scanner shows crash data error.

Before writing of "cleared" dump there are only 4 errors (2 pretentioners, 1 side airbag and crash data).

I checked all wires and resistance between pairs into airbag' connector. There are 6 airbags (resistance about 1-2 Ohm)
and 2 pretentioners (resistance 2-3 Ohm).

[karol34]

I throw different content and then see in what will be mistakes