PDA

View Full Version : DAIHATSU SIRION 1.0L 2000 need immo off solution



_estima_
3rd March, 2016, 10:34 PM
hi friends

i need i realy good solution for immo off daihatsu sirion 1.0L year 2000
when i diag. the srs , i have comuniction error , and i think erase eeprom of ECU. I read eeprom with tree programers and dont find immo lines :(

if any guy have a solution for me , i appreciated so mutch . or if have dumps of ECU and IMMOBOX , i try to make new KEYS.

thanks

_estima_
3rd March, 2016, 10:35 PM
93LC66 its from IMMOBOX

93C56 its from ECU


thanks

sbtriny
4th March, 2016, 06:46 AM
93LC66 its from IMMOBOX

93C56 its from ECU


thanks


hi, m8.
I try to program with tango.
tango can recognize file daihastu sirion 4C.
what do you have programmer?



regard

simon77
4th March, 2016, 08:27 AM
ecu dump has missing lines try to find dump from another ecu. after this you must virgin immo and reprogram keys into immo . ecu and immo will auto sync after the keys are programmed.
regards

_estima_
4th March, 2016, 11:19 AM
Hi friend
I dont have tango , its the next tool i buy , only have sbb and zedbull


Sent from my iPhone using Tapatalk

_estima_
4th March, 2016, 11:21 AM
Hi friend simon
Do you explain me , how can i virgin the dump from another Car ? I have files :)
Hi virgin immobox file or Ecu file ?


Sent from my iPhone using Tapatalk

_estima_
4th March, 2016, 05:10 PM
Any guy have schematic for this Ecu , i can try emulator .
But dont have pinout :(


Sent from my iPhone using Tapatalk

avital
4th March, 2016, 07:36 PM
Officially available emulators,they will not,You need a special emulator for daihatsu system.

_estima_
4th March, 2016, 08:04 PM
i have emu suzuki for 93c56 carlab , and i have one diferents files .

if any guy have ecu file + immo box file , i try to make an key :)

i found file from passo 996 immo off ,but dont work for me :(


please help me

avital
4th March, 2016, 09:41 PM
Some Daihatsu use security protocol from toyota not from suzuki, i have my made emulators for toyota in free time I try make emu for daihatsu.


Wysłane z iPhone za pomocą Tapatalk

AndyCZ
4th March, 2016, 09:55 PM
try these dumps and report. good luck.

_estima_
5th March, 2016, 07:59 PM
hi friend avital

its possible to send me , eletrical wiring diagram for this unit , or pinout ... ?

i appreciated your great help :)

_estima_
5th March, 2016, 08:01 PM
try these dumps and report. good luck.

thanks for the dumps , i buy two transponders ...

one TPX1 glass and other texas 4c .... and i try to programming with effi and zedbull , and says me " wrong data "

what its wrong ?

AndyCZ
6th March, 2016, 10:21 PM
thanks for the dumps , i buy two transponders ...

one TPX1 glass and other texas 4c .... and i try to programming with effi and zedbull , and says me " wrong data "

what its wrong ?
maybe programmer problem. These dumps well accepted with zedfull and tag.

_estima_
7th March, 2016, 09:15 AM
Yes , problably you are right
But when i try tu read transponder and next programme , works good
But if i open the dump and try to programme transponder , says me " wrong data " , and i dont know whats happen :(
If transponders not compatible


Sent from my iPhone using Tapatalk

AndyCZ
8th March, 2016, 01:28 PM
@_estima_ I got in workshop the same car, ECU the same but immobox is little different. Mine not start at all, I guess not immo problem (probably).
PM me, we should find solutions with these Japanese.

By the way, you got reply on CarLabImmo :chuncky:.

_estima_
8th March, 2016, 01:29 PM
Ok my friend


Sent from my iPhone using Tapatalk

sbtriny
8th March, 2016, 02:35 PM
hi, friend
can you read id 4c and upload picture?



Sent from my iPhone using Tapatalk

simon77
8th March, 2016, 06:25 PM
OK this is what i found on a 2000 yrv. immo box i filled with ffffff bridged pin 4,13 on obd plug put in key 1 ignition on , remove put key 2 ignition on ,remove put ignition on remove key remove bridge . this loaded all keys to immo and also auto syc engine ecu and car starts.
immo box was the same as your picture but different part number.
regards

wlk889
9th March, 2016, 03:23 AM
Hi friends.
Any one done ecu immo bypass?
I bought a daihatsu engine with inly the wiring and ecu. We try to start on the other car. It cant start. Chk with scan tool, it error code is immo problem. Check everthing found out that no signal flow on the ignition coil system.
My ecu model is 89560-97481.
Check online, thus engine is from daihatsu sirion or Toyota Duet year 1998-2002

the original bin file from ECU
Can someone help to bypass it without using immo key controller?
Thank if anyone can help.

AndyCZ
9th March, 2016, 04:23 PM
can someone check the resistance immo antena coil? Mine have 1.2 Ohm. Doesn't seem to me right. Thanks. @wlk889 no immo off solution for this car. Don't waste your time, repair.

AndyCZ
9th March, 2016, 07:29 PM
I'm looking for good dump for this ECU 89560-97429. Many thanks.

wlk889
10th March, 2016, 02:58 PM
ok. thx Andycz
Then i have to find the wiring diagram to get the Immo work. Anyone got the wiring diagram/workshop manual for this car?

avital
12th March, 2016, 12:18 PM
363301
Hi
I started making emulator for daihatsu, for ECU 89560-97204 no problem It will be made, have all elements on my table :)
For ECU 89560-97481 i think its ECU have the same system, need buy ECU for tests.
Soon give info about the progress.

added:

363672363673

I made working emulator for system immo IMS-04C, end of trouble with Daihatsu.
Tested with ECU 89560-97204.

AndyCZ
14th March, 2016, 07:10 PM
great job! can we test your emu on my ECU 89560-97429 ?

I have no problem with immo, on mine igniter is dead but still have the car in my workshop.

_estima_
14th March, 2016, 07:49 PM
good work :D

avital
14th March, 2016, 08:35 PM
good work :D

Very thanks design emulators is my hobby(Of course, not only) :)

for further testing i buy other ECU for tests 89560-97429, 89560-97481

wlk889
15th March, 2016, 11:45 PM
Good work. Where can we buy the emulator?

autocheck
26th August, 2016, 08:04 PM
Where can we get that have a lot of these cars stuck

Sent from my A718 Xplora Plus using Tapatalk

avital
30th August, 2016, 11:07 AM
Where can we get that have a lot of these cars stuck

Sent from my A718 Xplora Plus using Tapatalk

I need to know if the emulator is compatible with your computer
This ecu is not present in my country,
how much this type daihatsu You have to run? if really lot, i buy this type ECU for tests.

glasstech
13th September, 2016, 03:11 PM
Hello how are you.


I'm with a problem with my car boot Daihatsu Cuore 1999 injection three-cylinder 850cc engine. Immobilizer is activated and data FFFFF the engine Ecu


here in Argentina came only two years in this country (1998 and 1999) and there are few of these cars


I need help please because they saw several locksmiths and tell me that no files or database to charge the Eeprom


i was reading that are making an emulator for that Immobilizer, some solution?
thanks and sorry for my little English
Greetings from Argentina

glasstech
14th September, 2016, 02:50 PM
ECU 112000-5100 89560-87287
Daihatsu Cuore 1999 machine ED-20 850cc

thanks for information

glasstech
14th September, 2016, 04:40 PM
[Quote = avital; 2725036] 363301
Hola
empec? a hacer emulador para daihatsu, de 89560 a 97204 ECU ning?n problema Estar? compuesto, tiene todos los elementos en mi mesa :)
Para 89560-97481 ECU ECU Creo que es tener el mismo sistema, es necesario comprar ECU . para las pruebas
Pronto dar? informaci?n sobre el progreso. agregado: . hice emulador de trabajo para immo sistema IMS-04C, un sinf?n de problemas con Daihatsu . Probado con desde 89.560 hasta 97.204 ECU [/ quote]



363672363673


Hello AvitalYou know if it can work in an ECU DENSO
112000-5100 89560-87287
Daihatsu Cuore 1999 ED-20 850cc engine


thanks for the info you give me

greetings from Argentina

avital
19th September, 2016, 02:29 PM
Send detail of Your ECU and immo, from ECU send foto with high resolution from electronic board.

richard27
15th April, 2020, 01:33 PM
[QUOTE = simon77; 2722260] Tamam, 2000 yrv'de bulduğum şey bu. immo kutusu i anahtar 1 ateşleme koymak obd fiş ffffff köprülü pim 4,13 ile dolu, koymak anahtar 2 ateşleme kaldırmak, kaldırmak anahtar kaldırmak köprü kaldırmak ateşleme kaldırmak. bu immo tüm tuşları yükledi ve ayrıca otomatik syc motor ecu ve araba başlar.
immo kutusu resminizle aynıydı, ancak farklı parça numarası.
Saygılarımızla [/ Alıntı]


Thank you very much, this information is very good for me. add a reputation for you