View Full Version : focus 2007 dash to ecu sync please edc16c34
86dejan
3rd March, 2016, 10:42 PM
please can anyone synchro for me ECU with dash
focus 1.6tdci
ecu is from another car and dont have original ecu
edc16c34
dash visteon MCU 1K78X
i try with FORD ALL IN ONE but without succes
dash eeprom cant open, but same eeprom can open with Effl
361682
361683
many thanks in advance on any help
ypiter
4th March, 2016, 07:06 AM
Try.. Pass pm
86dejan
4th March, 2016, 09:13 AM
Try.. Pass pm
now outcode for coding is always 000000 in PCM
rokibar
4th March, 2016, 09:44 AM
your dash dump without keys. use another ok dash dump, make keys with some programmer and make sinhronisation betwen new dash and ecu with software. or make sinhro and add keys with diagnostic with new incode. if need i have ok dash dump.
lupu_sandu
4th March, 2016, 10:03 AM
If outcode is always 00000, means that you have a corrupted dump.
86dejan
4th March, 2016, 11:42 AM
000000 is with ypiter dump
86dejan
4th March, 2016, 11:56 AM
your dash dump without keys. use another ok dash dump, make keys with some programmer and make sinhronisation betwen new dash and ecu with software. or make sinhro and add keys with diagnostic with new incode. if need i have ok dash dump.
i go try first solution and report, if not succes i will contact you for dump
rokibar
4th March, 2016, 12:36 PM
you welcome
86dejan
4th March, 2016, 07:31 PM
have you UK or EU dump ??
rokibar
4th March, 2016, 07:48 PM
europe models
361853
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.