Kess v2 External Exception EEFFACE help

[blackpirate]

hey guys
as the title say i need some help over here

after flashing npx with new firmware i got that error!(i have left old sd card filkes when i tryed to update!)

i thought nxp its damaged
so i conected again and reflashed with succes!

same error
i chaged sdcard, usb cable etc
i ve put 2.08 sw , 2.06 sw
nothing

thing its when i plug into usb both LED keep flashing! on and off all the time!!


any suggestions??

i checked sdcard pins all are ok

bilione thnx in advance

bp

[gazvts]

is this a new nxp ? or old one with 3.099 fw ?

[blackpirate]

Yes old fw! I had other device and on that update was all ok!

[niwat_spp]

check SD card

[teamtuner]

hot air to nxp...wrong salder

[artek_was]

I had the same problem. I buy new. The fastest way to repair this

[blackpirate]

sd card as i told , i checked changed , still no luck


i will try tomorrow hot air on nxp



artek
you bought new kess or new nxp?

[morgano]

Both led flashing means corrupted firmware in nxp, reflash again with good file.

If still flashing nxp damaged. Did you tried to remove the crp3 via the toast method? Maybe some memory cells got ~~~~ed and time to replace nxp.

[artek_was]

new kess , do not waste your time and health

[VanDutch2016]

Bad connection nxp i had This problem inclu error when i changed the nxp.. Resolder did the trick for me

Verstuurd vanaf mijn XT1039 met Tapatalk

[blackpirate]

i ve reflashed 2 times already! it say success write and verify!

the firmware i have its 100% good! cars trucks bikes boats etc

edit
i will test and report after resoldering!

[blackpirate]

Thnx to all guys!! I ve resoldered, flux and iron then hot air! LEDS keep blinking! But then reprogrammed nxp, and i was able to do update! All ok now! Thnx again
I didn't try read any car but i think it will be ok