PDA

View Full Version : Need help for EDC16



Siham
7th March, 2016, 12:02 AM
Hello Friends,


I have to read a EDC16 to make it DPF off , and was wondering what tool I have to use : Fg galletto ,BDM100 or Kess V2 ?
Fg galletto and kess witch one is safer for read this ECU by obd ?

Best Regards! :02.47-tranquillity:

Babos
7th March, 2016, 12:04 AM
Lot cars have edc16!!!
Say what brand and model?

Siham
7th March, 2016, 12:19 AM
Toyota corolla , i think is an edc16c10 or edc16c31.
Thank you Mate :)

ECU2009
7th March, 2016, 12:56 AM
friend con kess v2

Siham
7th March, 2016, 01:06 AM
Did you tried Clone (chinese) kess on this ECU ?

Thank you!

Siham
7th March, 2016, 02:12 PM
So nobody can give me right way to read this ECU ? :(

Siham
14th March, 2016, 05:48 PM
Guys Sorry ,I'am in a lille ~~~~ :(
Received finally ecu , and it appear that is not an EDC16 but a EDC17 infineon Tricore SAK-TC1766 , so I'am litle lost !!!
I only have BDM100 .FG galletto and BDM frame , so know my question is: can FG galletto read this ecu?
I looked into Carlist and Galletto seam to do all toyota EDC17 , so PLEASE can anyone advise me if Fg is safer or better order other tool like ktag/kess ?
Please Guys give me a help because I'am totaly lost now.

Thank you all.

kospoz
14th March, 2016, 08:43 PM
Guys Sorry ,I'am in a lille ~~~~ :(
Received finally ecu , and it appear that is not an EDC16 but a EDC17 infineon Tricore SAK-TC1766 , so I'am litle lost !!!
I only have BDM100 .FG galletto and BDM frame , so know my question is: can FG galletto read this ecu?
I looked into Carlist and Galletto seam to do all toyota EDC17 , so PLEASE can anyone advise me if Fg is safer or better order other tool like ktag/kess ?
Please Guys give me a help because I'am totaly lost now.

Thank you all.

I have read toyota auris edc17 with fgtech v54 but only read it has in pdf instructions

Siham
14th March, 2016, 09:18 PM
Thank you Dude ,

Just checked Fg manual connections , and i need resistance of 1000 oms ,but when it say connect to ground it mean to connect it on ground wire from FG ? Or I'am wrong ?

Tank you & best regards! :)

pulsar2000
14th March, 2016, 10:08 PM
Normally to Grey Boot wire, you sure says ground in which case Black wire,,,,,
i would look again to be sure,
or look Google,
whats the Exact ECU type, edc17c ???

cool2503
14th March, 2016, 10:11 PM
Dosen't matter where you take gnd(fgtech wire or ecu pcb gnd) and you have on fgtech adapter for tricore that rezistance(1kohm)

keneksi
14th March, 2016, 11:24 PM
Припой серый провод настолько надежны, и Отпаяйте ее до конца работы, я читал и писал V54 все прошло хорошо в течение длительного времени только записи.
I forgot resistor 1000 ohm tucked away in a gray wire under the insulation and is connected with the mass.

Siham
15th March, 2016, 12:30 AM
Normally to Grey Boot wire, you sure says ground in which case Black wire,,,,,
i would look again to be sure,
or look Google,
whats the Exact ECU type, edc17c ???


Yes you right mate is the grey wires that is for boot .
Sorry still newbie in ecu reading .
BTW the chinese galleto does already have inside resistance 1000 omh like the original ?
Because in a manual it say that he already have inside.
Here full Galletto boot user manual : https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwit7J6PqcHLAhVEJ5oKHQprDMwQFggcMAA&url=http%3A%2F%2Fwww.spobd2.com%2Fupload%2Fservice %2Ffgtech_boot_tricore_user_manual.pdf&usg=AFQjCNGMMTCIoYGfoBC9OaojuklQLO7RDQ&bvm=bv.116636494,d.bGs

Its an edc17 but still not fixed if its c17 or c37 because it change from site to site when i search it, also FG say it an edc17cp07 , my infineon tricore MCU is SAk-TC 1766 -192F80HL same as mine also ecu pcb is quite the same if not for one litle diffrence , but boot pin is the same.
Keneski can you be more clear please , i did not got what you mean mate .
cool2503 do you have a pics pr can indicate me where is the gnd in ecu pcb if not in th gnd pin on the connector.

Thank you all ! :)

CustomCars
15th March, 2016, 08:44 AM
Galletto have resistor inside boot cable, can see it on top. Not inside device, like ktag.

pulsar2000
15th March, 2016, 09:44 AM
Yes you right mate is the grey wires that is for boot .
Sorry still newbie in ecu reading .
BTW the chinese galleto does already have inside resistance 1000 omh like the original ?
Because in a manual it say that he already have inside.
Here full Galletto boot user manual : https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwit7J6PqcHLAhVEJ5oKHQprDMwQFggcMAA&url=http%3A%2F%2Fwww.spobd2.com%2Fupload%2Fservice %2Ffgtech_boot_tricore_user_manual.pdf&usg=AFQjCNGMMTCIoYGfoBC9OaojuklQLO7RDQ&bvm=bv.116636494,d.bGs

Its an edc17 but still not fixed if its c17 or c37 because it change from site to site when i search it, also FG say it an edc17cp07 , my infineon tricore MCU is SAk-TC 1766 -192F80HL same as mine also ecu pcb is quite the same if not for one litle diffrence , but boot pin is the same.
Keneski can you be more clear please , i did not got what you mean mate .
cool2503 do you have a pics pr can indicate me where is the gnd in ecu pcb if not in th gnd pin on the connector.

Thank you all ! :)

Yes clone china Boot cable has 1000 ohm built in on cable, Quite often varible difference inside ecu to Instructions, so if boot Pin same, you just need to get cable on rear of ecu and read, BTW K Tag, Perfect for most ecu,,, good Diagrams and Details,
most likely edc17cp17 or cp07,

akiminem
15th March, 2016, 02:58 PM
for this ecu ktag 6.070 with ksuite 2.13 it's ok...also clone....
if you have problem for important map post your file and i can help you to find them

Siham
15th March, 2016, 09:36 PM
So tried to read the ecu as writed in FG manual but FG indentify ECU but when want to read it it say error can not get the pass please try VAG t-prot pass tool ,but my ecu is for Toyota not VAG.
Anybody get success readind this ecu with FG ?
My ECU is a EDC17cp37 with tricore SAK 1766 , and seam that nor kess or ktag support this ecu also it is not listed in their list,right or wrong?

Thank all !

pulsar2000
16th March, 2016, 10:04 AM
So tried to read the ecu as writed in FG manual but FG indentify ECU but when want to read it it say error can not get the pass please try VAG t-prot pass tool ,but my ecu is for Toyota not VAG.
Anybody get success readind this ecu with FG ?
My ECU is a EDC17cp37 with tricore SAK 1766 , and seam that nor kess or ktag support this ecu also it is not listed in their list,right or wrong?

Thank all !

Not in my K tag list, older corolla edc16 but NO edc17 for newer Corolla.....