PDA

View Full Version : need pin from dump .. hyundai santafe 2002



hyundaijogja
7th March, 2016, 07:54 AM
Dear mate , plz help .. i need PIN ( 4digit ) from this dump ( hyundai santafe 2002 )
Big thanks for your kindness :)

Sorry for the pass

lesakljucevi
7th March, 2016, 08:00 AM
Protect with pass???

hyundaijogja
7th March, 2016, 08:07 AM
sory for the pass .. attachment w/o pass done

hyundaijogja
7th March, 2016, 08:30 AM
Hlp plzz ..

rokibar
7th March, 2016, 08:55 AM
it is sys1 where pin code can be: 4 latest number of chasis or 2345 or 0000
start with 2345

hyundaijogja
7th March, 2016, 09:12 AM
@ROKIBAR , tnkz man .. ill try it .. report later

hyundaijogja
7th March, 2016, 10:00 AM
@rokibar .. didnt work man .. can i just remove the immo immo inside the dump ? or anything will start the engine ..plzzz
Big thanks before

rokibar
7th March, 2016, 10:04 AM
2345 must work. which transponder you use? goes id46

rokibar
7th March, 2016, 10:10 AM
362185................................

hyundaijogja
7th March, 2016, 10:11 AM
i use 4c .. it didnt record to the key

rokibar
7th March, 2016, 10:19 AM
wrong transponder my friend. use id46 all be fine

hyundaijogja
7th March, 2016, 10:51 AM
thankz man .. try it ..report later

sbtriny
7th March, 2016, 11:50 AM
hello, m8.
you don't program to use id 46
use id 4d60.
it's correct chip

good luck


Sent from my iPhone using Tapatalk

hyundaijogja
7th March, 2016, 12:05 PM
can we reconize the key from the dump ? ..thx

labase
7th March, 2016, 12:40 PM
can we reconize the key from the dump ? ..thx
Hi,
post ID60 data and i do it for you.
thks.

hyundaijogja
7th March, 2016, 12:44 PM
Thx bro .. but all i have just that dump ..all key lost

rokibar
7th March, 2016, 12:52 PM
unsuccessful attempts can corrupt your damp. be careful. ..

rokibar
7th March, 2016, 12:58 PM
[QUOTE=sbtriny;2721335]hello, m8.
you don't program to use id 46
use id 4d60.
it's correct chip

good luck



Sent from my iPhone using Tapatalk[/Q
you are right. sorry

rokibar
7th March, 2016, 01:08 PM
have you any tool for write eh2 head ? we can send you data

hyundaijogja
7th March, 2016, 01:14 PM
have you any tool for write eh2 head ? we can send you data
i use tango for key reprograming ..

hyundaijogja
7th March, 2016, 01:18 PM
unsuccessful attempts can corrupt your damp. be careful. ..
broken dump cause error code ` eeprom error ` but with this dump that error code didnt shows up .. i think dump is good ..

rokibar
7th March, 2016, 01:19 PM
so, you have all what you need.

hyundaijogja
7th March, 2016, 01:21 PM
still trying to write on id46 .. report later
use pin 2345 and 0000 ..

rokibar
7th March, 2016, 01:22 PM
dump ok. if id60 than use maker hyundai H1 2001... 93c56 .make key and rewrite new file. all done

sbtriny
7th March, 2016, 01:22 PM
broken dump cause error code ` eeprom error ` but with this dump that error code didnt shows up .. i think dump is good ..

Try to program by tango.
hyundai sonata 2003- (93c56)
you can make a key
good luck

hyundaijogja
7th March, 2016, 01:23 PM
so, you have all what you need.
pin code error when try to write on id46 ..still trying .. thanks

hyundaijogja
7th March, 2016, 01:25 PM
Try to program by tango.
hyundai sonata 2003- (93c56)
you can make a key
good luck
can i use id46 or it should be 4d60 ? tq

hyundaijogja
7th March, 2016, 01:27 PM
dump ok. if id60 than use maker hyundai H1 2001... 93c56 .make key and rewrite new file. all done
trying ..report later ..tq

hyundaijogja
7th March, 2016, 03:30 PM
use standart immo scanner to write key at id46 & 4d60 with pin code 2345 : failed !!
any help aapreciated ..

sbtriny
7th March, 2016, 03:54 PM
use standart immo scanner to write key at id46 & 4d60 with pin code 2345 : failed !!
any help aapreciated ..

if you tried to program with wrong password over 3times, ecu locked.
you must turn ignition on 1 hour for unlock ecu.
after 1hour, you can program key(id 4d60).
pin is 2345
if you put in wrong pin again, you'll wait 1 hour more with ignition on.
4 digit pin is id 4d60
6 digit pin is id 46.
it's easy.

hyundaijogja
7th March, 2016, 04:06 PM
if you tried to program with wrong password over 3times, ecu locked.
you must turn ignition on 1 hour for unlock ecu.
after 1hour, you can program key(id 4d60).
pin is 2345
if you put in wrong pin again, you'll wait 1 hour more with ignition on.
4 digit pin is id 4d60
6 digit pin is id 46.
it's easy.
tq bro .. trying again in 1hour .. report later

hyundaijogja
8th March, 2016, 12:34 AM
after an hour .. re write dump on 56c , with standart scanner write on 4d60 using 2345 .. done !
engine start .. 100/100
thankz lot ..bro

solved!!