Immo off C4 ME7.4.5

[delectric]

Hi,

I have a burned C4 ECU and need to install a used one in the car. It's a Bosch 0261208899. I don't know what to do :apologetic:.

I think I can't clone because the old is very damaged (I think I couldn't read it). I was thinking to copy 95320 from the burned to the used but if the immo is in the flash it will block it.

Any idea to solve the problem?:cower:

Many thanks.
Best regards.

[vlaki electric]

try to swap eproms if you have the same hw numbers and you will see what is gona hapen after. i think the immo files are in eprom

[delectric]

try to swap eproms if you have the same hw numbers and you will see what is gona hapen after. i think the immo files are in eprom

The burned one is a 0261208899 and the new one is a 0261208491, both are from C4 with NFU engine.

Regards.

[vlaki electric]

must be the same hw number,or try this but i am not sure it was be ok

[budG60]

I am facing a problem with a C4 which sometimes has an immo problem. Is it possible to remove the immo from this ecu? If yes, 95320 eeprom solution?
Ecu 0261208899