Log in

View Full Version : Mercedes Atego Immo Off needed



TumiSA
13th March, 2016, 09:53 AM
Hi

Can anybody help with Mercedes Atego 93c86 Immo Off file, vehicle was coded twice with tango started fine but keeps failing after staying overnight. suspect a faulty transponder reader.

Can anybody help with immo off file to get truck to the workshop to inspect vehicle further?


Thank you in advance

Bllinda
13th March, 2016, 03:14 PM
Three keys are visible.
Program ....

Gavra
13th March, 2016, 03:19 PM
Those trucks do NOT like Chinese T5......use quality one and it will work good. Had headache with one couple years ago, 7 Chinese T5 was bad......bought one dealer blank key and it's working still with no problem.

Bllinda
13th March, 2016, 07:47 PM
T.5 Chinese are running a very small distance. Bad quality.

thayer201
13th March, 2016, 10:05 PM
sorry to jump in on this tread,

could some one check my dump to see if keys are able to be coded with zedbull? or immo off
programe show can be done but could someone check this over.



thanks363540

dib47
13th March, 2016, 11:51 PM
Hi. Keys can be coded with zedbull, or clone with effi

When you say coded twice with tango, what do you mean ? Did it fail, made another transponder from same dump & then it started again? If so then it can only be transponder, not reader. Are you using proper t5 or pcf7930 etc.

TumiSA
14th March, 2016, 08:50 AM
Those trucks do NOT like Chinese T5......use quality one and it will work good. Had headache with one couple years ago, 7 Chinese T5 was bad......bought one dealer blank key and it's working still with no problem.

Thanks for the Tip Gavra

TumiSA
14th March, 2016, 08:55 AM
Hi. Keys can be coded with zedbull, or clone with effi

When you say coded twice with tango, what do you mean ? Did it fail, made another transponder from same dump & then it started again? If so then it can only be transponder, not reader. Are you using proper t5 or pcf7930 etc.

Coded the first time, truck drove whole day next day wouldn't start, did the same thing the 2nd time again. I'll get a proper transponder and try again. I used a T5 on both occasions.

ecufix
14th March, 2016, 09:38 AM
Check your harness under gearbox ,regards

thayer201
14th March, 2016, 10:10 AM
sorry to jump in on this tread,

could some one check my dump to see if keys are able to be coded with zedbull? or immo off
programe show can be done but could someone check this over.



thanks363540


Anyone? Offering to take a look please.

dib47
14th March, 2016, 01:42 PM
I have looked at this & answered above. The file is good & zedbull will make T5 transponder to start the vehicle. What else do you need to know ?

thayer201
14th March, 2016, 02:03 PM
I have looked at this & answered above. The file is good & zedbull will make T5 transponder to start the vehicle. What else do you need to know ?


sorry didnt see that post was for me. no thats great thank you for taking a look.. no more info needed..

many thanks