PDA

View Full Version : help with bosch m3.8.3



Andrei2015
13th March, 2016, 12:35 PM
I am trying to help a friend reading/writing 06A906018CG- 0 261 206 518 - Bosch M3.8.3. I know that mpps can only write this ECU, my question is will any original with same hw number will fit this ecu? Or do I have to look for any other info? Thank you

icezero2010
16th March, 2016, 01:24 PM
I am trying to help a friend reading/writing 06A906018CG- 0 261 206 518 - Bosch M3.8.3. I know that mpps can only write this ECU, my question is will any original with same hw number will fit this ecu? Or do I have to look for any other info? Thank you


you can use any agu file all work on this ecu . but if you need cruise control there are one file with that .

Andrei2015
16th March, 2016, 02:08 PM
you can use any agu file all work on this ecu . but if you need cruise control there are one file with that .

I have find file, moded and sent it to him, but when he try to write mpps v16 has only bosch m5.x.x and I told him to drop it, because he is not good in soldering and car is 2000km from me. Thank you anyways

gezame
16th March, 2016, 09:44 PM
Hi
Mpps, only write ecu is flash is 29f200.
Br.

icezero2010
17th March, 2016, 10:09 AM
I have find file, moded and sent it to him, but when he try to write mpps v16 has only bosch m5.x.x and I told him to drop it, because he is not good in soldering and car is 2000km from me. Thank you anyways

write this with m5.x.x that work :-)

listerin
15th April, 2016, 03:54 PM
hello, you need put 12v to pin13 in obd port and select m5.xx ecu, that write this ecu...