PDA

View Full Version : subaru legacy, 2005, 2,0l petrol engine secondary air injection delete


mafia666
15th March, 2016, 10:36 PM
Hi. Is it possible some how to delete dtc from this subaru legacy made 2005, 2.0 petrol engine? i have tactrix open port, but it does not connects to it, and i cannot read it.
If it is possible to delete dtc, then next question is, what tool reads ecu in this subaru? thanks.
DCCC
16th March, 2016, 01:41 AM
You can use romraider + tactrix cable to delete the dtc and you will just need the block off plates for the heads.
S.W.A.M.I
16th March, 2016, 05:21 AM
do you have the ecu part number or ecu id?
ive done many of these dtc off
mafia666
16th March, 2016, 04:38 PM
hitachi ecu, 22611 am130, a18-000 r6m 7531 . thanks. p.s. tactrix cable doesn't connect. bought it original.
xirtam
16th March, 2016, 04:53 PM
To read and write this ECU, you have to join together the two green connector shown in the picture, located under the steering wheel:
364114
S.W.A.M.I
16th March, 2016, 07:48 PM
i dont think hitachi ecu model can be tuned with ecuflash, only denso

i think mmcflash software module is needed for this ecu
teamtuner
16th March, 2016, 08:15 PM
this is really a top subject ...thanks to started this ....
mafia666
17th March, 2016, 12:49 AM
I knew about These connectors. Did not help. I will try pcmflash soft. Next step is to find someone, who can take dtc off from file.

Sent from my SM-G925F using Tapatalk
xirtam
17th March, 2016, 03:25 PM
if you just want to del dtc error you can try freeSSM link (https://sourceforge.net/projects/freessm.berlios/) need openport 1.3 or vag cable not support op2.0
to read use pcmflash , i think maybe you have mod your car ,it is not easy to turn off dtc in rom and cost too much on not well support ecu.......