Hello, Code vwz1z3

[tentchou]

RCD 510
815 7 640 206 360
3C8 035 195F
VWZ1Z3M8242000
thanks in advance

[sanixmen]

RCD 510
815 7 640 206 360
3C8 035 195F
VWZ1Z3M8242000
thanks in advance

Hi, Look this: http://www.digital-kaos.co.uk/forums/showthread.php/379014-RCD310-510-BLAUPUNKT-BOSCH-Algo-FIRST-2-digits
If need full code read NEC..

[tentchou]

thanks , give me the first 2 digits

[sanixmen]

thanks , give me the first 2 digits

Upload modified dump...

[tentchou]

ok, i will modify the dump and i will turn on radio and read again the dump and send you

[sanixmen]

ok, i will modify the dump and i will turn on radio and read again the dump and send you

yes... upload here...

[tentchou]

dump modified ,

[shooting]

dump modified ,

Code is 00xx

wbr

[tentchou]

I modified dump good or no??

[shooting]

I modified dump good or no??

Did you modify the original dump then put it in the radio and take second reading?

wbr

[tentchou]

i will put the dump modified , or original dump and try to enter code , and if you cangive schema for read nec i have nec reader and i did with max but when i press init ,failed error , thanks again

[shooting]

i will put the dump modified , or original dump and try to enter code , and if you cangive schema for read nec i have nec reader and i did with max but when i press init ,failed error , thanks again

1. PUT MODIFIED DUMP IN RADIO
2. POWER ON AND WAIT 30 SECONDS
3. READ AGAIN AND SAVE FILE
4. POST ORIGINAL & NEW FILE HERE FOR CODE

wbr

[tentchou]

original and modified

[passcard]

original and modified


00xx ......................

[shooting]

original and modified

Already answered in Post #8

wbr

[tentchou]

i tried with the dump modified in radio, 00-99 , but not work , if you can modify original dump and give me , thankssss

[passcard]

In eeprom write ORIGINAL dump! After try 0099-0000 code.....

[tentchou]

so i don't use modified dump; i sent original dump; so you can modifiy and sent me again, or dump modified just for give me code and i will put again original dump and try code?, explain good , thanks again

[passcard]

so i don't use modified dump; i sent original dump; so you can modifiy and sent me again, or dump modified just for give me code and i will put again original dump and try code?, explain good , thanks again

Yes, dump modified is use only for get first two digit, after that write ORIGINAL dump in eeprom and try get code 0099-0000.

[tentchou]

thanks again , i will try and tell you,

[tentchou]

Thanks for all, code 0018 ,